ANTEK ISK 100 Operation & User’s Manual
Read Online
Read the ANTEK ISK 100 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
INTRODUCTION 1.1 Case Specifications ............................................................................................. 3 1.2 Diagram .............................................................................................................. 3 1.3 Power Supply Specifications .............................................................................. 4 HARDWARE INSTALLATION GUIDE 2.1 Removing the Left Panel ............. ...
At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s computer enclosures. For mor ...
8.7” (H) x 3.8” (W) x 8.3” (D) Net Weight 3 lbs / 1.36 kg Cooling 1 x 100 mm 2-speed side fan Drive Bays 2 x 2.5” internal drive bays Motherboard Size Mini-ITX Front I/O Panel 4 x USB 2.0 AC’97 / HD Audio In and Out Power Supply 90-watt internal adapter 1.2 DIAGRAM 1. 1 x 100 mm 2-speed side fan 2. 2 x 2.5” internal drive bays 3. Moth ...
The ISK 100 is powered by a 90-watt power adapter. Input characteristics: Rated Voltage Input Voltage Range Frequency Range 100VAC – 240VAC 90 VAC – 264 VAC 47 Hz – 63 Hz Output characteristics: Rated Power Rated Voltage Voltage Range Output Current 90W 19V 18.4V ~ 20.0V 0A ~ 4.7A The adapter is rated at least 85% efficient at 100 VAC and 240 VAC input voltage and maximum load. A variety of industrial-grade safety ci ...
2.1 REMOVING THE LEFT PANEL Lay the case on its right side, with the I/O panel facing you. You will be removing the left panel (the one with the fan) 1. Remove the two screws from the rear of the panel. 2. Remove the panel, making sure to lift the back portion first. If this is the first time you are opening the case, remove the drive cable bundle and tool bag from the inside of the case and set them aside. Note: Do not use ...
2.5” hard drives can be mounted to a bracket underneath the motherboard. To access this bracket, you will need to remove the right side panel. If you have just installed the motherboard, it can be helpful to replace the left side panel before continuing. 1. Lay the case down on its left side, and remove the right panel as described in section 2.1. 2. Remove the four screws securing the bracket to the case (see ...
2 USB Power 2 3 Negative Signal 1 4 Negative Signal 2 5 Positive Signal 1 6 Positive Signal 2 7 Ground 1 8 Ground 2 9 Key (No Connection) 10 Empty Pin Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 6 MIC2_JD 6 Line Out (R) 7 F_IO_SEN 7 NC 8 Key (no pin) 8 Key (no pin) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (L) ...
Connected to your front panel are LED and switch leads for power, reset, and HDD LED activity. Attach these to the corresponding connectors on your motherboard. Consult your motherboard user’s manual for specific pin header locations. For LEDs, colored wires are positive ( + ). White or black wires are negative ( – ). If the LED does not light up when the system is powered on, try re ...
There is a 100 mm x 12 mm 2-speed fan preinstalled on the right-hand side of the case. It has an internal switch that allows you to choose between quiet performance or maximum cooling. The default speed setting is Low. The fan is mounted so that air blows out of the case. Size: 100 mm x 12 mm 2-speed fan Rated Voltage: 12V Operating Voltage: 10.8V - 13.2V Speed (RPM) Input Current Airflow Static Pressure Acoustic ...
Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC [email protected] Europe +31 (0) 10 462-2060 [email protected] www.antec.com © Copyright 2010 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. ...
