ViewSonic NMP-570W Manuals

1 NMP-570/ NMP-570w Network Media Player User Guide Model No. VS13807/ VS14604 IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual” i Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •� Reorient�or�relocate�the�receiving�antenna. •� Increase�the�separation�between�the�equipment�and�receiver. •� �Connect�the�equipment�into�an�outlet�on�a�circuit�different�from�that�to�which�the�receiver�is� connected. •� Consult�the�dealer�or�an�experienced�radio/TV�technician�for�help. Warning: You�are�cautioned�that�changes�or�modifications�not�expressly�approved�by�the�party� responsible for compliance could void your authority to operate the equipment. For Canada •� This�Class�B�digital�apparatus�complies�with�Canadian�ICES-003. •� �Cet�appareil�numérique�de�la�classe�B�est�conforme�à�la�norme�NMB-003�du�Canada. CE Conformity for European Countries The�device�complies�with�the�EMC�Directive�2004/108/EC�and�Low�Voltage�Directive� 2006/95/EC. Following information is only for EU-member states: The�mark�is�in�compliance�with�the�Waste�Electrical�and�Electronic�Equipment�Directive� 2002/96/EC�(WEEE). The�mark�indicates�the�requirement�NOT�to�dispose�the�equipment�including�any�spent�or� discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005%�Mercury�or�more�than,�0.002%�Cadmium,�or�more�than�0.004%�Lead. ii Declaration of RoHS Compliance This�product�has�been�designed�and�manufactured�in�compliance�with�Directive�2002/95/EC�of�the� European�Parliament�and�the�Council�on�restriction�of�the�use�of�certain�hazardous�substances�in� electrical�and�electronic�equipment�(RoHS�Directive)�and�is�deemed�to�comply�with�the�maximum� concentration�values�issued�by�the�European�Technical�Adaptation�Committee�(TAC)�as�shown� below: Substance Proposed Maximum Concentration Actual Concentration Lead�(Pb) 0.1% <�0.1% Mercury�(Hg) 0.1% <�0.1% Cadmium (Cd) 0.01% <�0.01% Hexavalent�Chromium�(Cr6+) 0.1% <�0.1% Polybrominated biphenyls (PBB) 0.1% <�0.1% Polybrominated�diphenyl�ethers�(PBDE) 0.1% <�0.1% Certain�components�of�products�as�stated�above�are�exempted�under�the�Annex�of�the�RoHS� Directives�as�noted�below: Examples�of�exempted�components�are: 1.��Mercury�in�compact�fluorescent�lamps�not�exceeding�5�mg�per�lamp�and�in�other�lamps�not� specifically�mentioned�in�the�Annex�of�RoHS�Directive. 2.��Lead�in�glass�of�cathode�ray�tubes,�electronic�components,�fluorescent�tubes,�and�electronic� ceramic�parts�(e.g.�piezoelectronic�devices). 3.��Lead�in�high�temperature�type�solders�(i.e.�lead-based�alloys�containing�85%�by�weight�or�more� lead). 4.��Lead�as�an�allotting�element�in�steel�containing�up�to�0.35%�lead�by�weight,�aluminium�containing� up�to�0.4%�lead�by�weight�and�as�a�cooper�alloy�containing�up�to�4%�lead�by�weight.

Full HD Wireless Network Media Player ViewSonic’s new NMP570w full HD wireless media player provides extreme reliability and stunning 1080P video playback mixed with rich content harnessed live from the cloud. The NMP570w utilizes the latest technologies - HTML5 for delivering dynamic information at the point of service over the web or from a network server. Easy –to-use content management software – Signage Manager Express now offers expanded templates in both landscape and portrait supporting HTML5 “Smart Widgets” for multi-zone screen applications. NMP-570w Support for HTML5. MPEG 1/2/4, H.264 Video Decoding IEEE 802.3 Ethernet 10/100 Base-T with auto-MDIX Built-in Wireless 802:11 b/g/n Display Outputs: HDMI, VGA, dual output video Audio Output: Stereo line output Signage Manager Express software - included Built-in Watch Dog Timer Applications: - Transportation Signage - Electronic Menu Boards - Retail Advertisements - Campus Communication - Trade Show Signage - Point-of-Sale Advertising 1 2 3 4 5 6 7 8 9 1080p Solid-State Wireless Network Media Player Connectivity OPERATING SYSTEM Linux SUPPORTING PROTOCOLS TCP/IP, HTTP INSTALLED SOFTWARE W3C-SMIL 3.0, W3C-HTML5 NETWORK MANAGEMENT Signage Manager Express CONNECTORS 10/100 Ethernet, Mini 3.5mm, WiFi 802:11 b/g/n DISPLAY HDMI, VGA, A/V AUDIO 3.5mm mini stereo port NETWORK 10/100 Ethernet USB USB (x2) DECODING Video MPEG-1, 2, 4; H.264, VC-1/WMV9 Audio MPEG-1 (layers 1 & 2), MP3 STREAMING PROTOCOL Types HTTP, local file playback RESOLUTIONS 640x480, 800x600, 1024x768, 1280x1024, 1280x768, 1366x768, 1920x1080 IMAGE FILE Formats JPEG, PNG LOCAL STORAGE 4GB flash memory CF card expansion slot SCANNING FORMAT SDTV 480i, EDTV 480p, HDTV 720p, 1080i SCREEN ROTATION Landscape, portrait (+90º, –90º) POWER DC 12V (max), AC Adapter 12V DC 1.5A AUTO RESET Automatic error recovery with built-in Watch Dog Timer OPERATING CONDITIONS Temperature 50º–104ºF (0º–40ºC) Humidity 5–85% (non-condensing) DIMENSIONS (W x H x D) Physical 5.9" x 4.3" x 1.1" (150.8mm x 110mm x 28.6mm) WEIGHT Net 0.76 lb. (0.35 kg) Gross 3 lb. (1.4 kg) WALL MOUNT MIS-D100 REGULATIONS FCC, FCC-ID, ICES003 WARRANTY One-year limited warranty on parts and labor. Specifications Media player, AC adapter, Ethernet cable, Quick Start Guide, User Guide on CD, Signage Manager Express CD Package Contents Sales: (888) 881-8781 or [email protected] • More product information: www.ViewSonic.com *Power savings may vary based on actual usage and other factors. Programs, specifications and availability are subject to change without notice. Selections, offers and programs may vary by country; see your ViewSonic representative for complete details. Corporate names, trademarks stated herein are the property of their respective companies. Copyright © 2012 ViewSonic Corporation. All rights reserved. [16013-01B-0412] NMP570W Full HD Wireless Network Media Player NMP-570w CF Card slot USB x2 Ethernet AV Out Lock slot VGA HDMI 12V DC in Rugged metal housing VESA compatible mounting bracket ViewSonic Corporation’s QMS & EMS have been registered to ISO 9001 & ISO 14001, respectively, by TUV NORD.

1 NMP-570/ NMP-570w Network Media Player User Guide Model No. VS13807/ VS14604 IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente las instrucciones en este manual” i Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. For Canada • This Class B digital apparatus complies with Canadian ICES-003. • Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead. ii Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% Cadmium (Cd) 0.01% < 0.01% Hexavalent Chromium (Cr6+) 0.1% < 0.1% Polybrominated biphenyls (PBB) 0.1% < 0.1% Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1% Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.