Vista VPSU2444EXTe Manuals

Ref: VPSU2444EXTe 24V AC WEATHERPROOF POWER SUPPLY VPSU2444EXTe MANUAL 24V AC 4A (4 X 1A FUSED OUTPUT) Thank you for choosing this high quality 24V ac 4A weatherproof power supply. Before attempting to connect or operate this product please make sure you carefully read these instructions for your safety. General: A 24V ac power supply capable of delivering fully rated current to load, housed within an IP68 enclosure allowing for external use; ideal for low powered CCTV installations. INSTALLATION AND SET-UP This unit is only suitable for installation as permanently connected equipment and MUST be fed from a mains power source having a separate (approved) disconnect device - fitted with a fuse or other over- current protection device rated at 3A maximum. The enclosure is rated at IP68; make sure that the appropriate connections made to and from the enclosure are to this level to retain the required IP rating for the product. Note: The lid of the enclosure is keyed and must be in correct orientation to ensure IP68 rating. The PSU should be installed according to all relevant safety regulations. 1) Fix to wall or other support structure using the screws/fixings supplied or use appropriate types for the surface it is being mounted to – note IP68 enclosure mounting holes are located within the lid screw apertures. 2) Mains input cable must be to the applicable standard with a 3A or greater current capacity, having a minimum operating voltage of 300/500V ac. 3) The low voltage output cable must be correctly sized to carry the rated load current to the devices connected to the PSU. 4) Mains input and low voltage output cables should be routed to use different entry/exit holes in enclosure. 5) To comply with current BS EN60950 safety legislation the supplied cable ties must be used to secure mains input and low voltage output wiring. Norbain SD Tel: +44 (0)118 912 5000 210 Wharfdale Rd, Fax: +44 (0)118 912 5001 Winnersh Triangle, Web: www.vista-cctv.com Wokingham, Berkshire, RG41 5TP, UK.