Welch Allyn Braun ThermoScan PRO 6000 Manuals

1 ThermoScan® Charging station Directions for use PRO 6000 Charging station

Mem C / F PRO 6000 Ear thermometer Directions for use

Braun ThermoScan® PRO 6000 Thermometer Cindy Kuiper Global Marketing Manager

ThermoScan® PRO 6000 Quick Reference Guide 1 2 3 4 5 Remove thermometer from cradle by gripping thermometer at base and pivoting up. Thermometer will turn on automatically. Probe cover icon will fash on display indicating a new probe cover is needed. Attach a new probe cover by pushing probe tip straight into box, then pulling thermometer out. Wait for the ready indication. Ring around MEASURE button turns green, thermometer will beep once and three lines on display indicate thermometer is ready. Place probe snugly in ear canal and direct toward opposite temple. Keep thermometer probe steady in the ear canal. Correct probe placement is essential for accurate measurements. Press and release MEASURE button. The thermometer will beep once, running dashes will appear on the display then the green ExacTemp light will fash, indicating consistent probe position. 6 Temperature measurement. A long beep and steady green ExacTemp light will signal the end of the measuring process. The temperature will show on the display. 7 * * * * Memory Press the MEMORY button to reveal the last completed temperature. Temperature conversion Press and release C/F button to view the measurement in the alternate temperature scale temporarily. Press button again to return to default temperature scale. Default temperature scale can be set with the C/F switch located inside the battery compartment. Manual timer Press and hold button for one second to activate timer. A beep is heard at the initiation of the timer. First segment will fash until frst 15 seconds are complete and then beep. (Repeats for 3 remaining segments.) At 60 seconds a long beep will sound. The thermometer will exit timer mode 5 seconds after last segment. You can exit timer anytime by pressing button again. Charge light indicator Illuminates indicating rechargeable battery is charging. Indicator changes from amber to green when battery is fully charged. Operation and technique Additional functions ® Remove used probe cover by pressing Probe Cover Ejector button . To achieve accurate measurements, use a new, clean probe cover for each measurement. To take another measurement, place a new, clean probe cover on the thermometer. 901054 UNLOCK icon displays when Security mode is active and counts remaining time available (if under 60 minutes) before thermometer is locked. When time runs out LOCK icon remains on display. Welch Allyn Technical Support (www.welchallyn.com/support) visit locations (www.welchallyn.com/about/company/locations.htm) Security and charging To UNLOCK, thermometer must be returned to charging station or compatible vital signs device. 1a 1b Mem C / F Mem C / F