WilTec 61343 Manuals

Operation Manual Sandblasting machine 61343 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific- antly. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us. The information contained in this document may alter at any time without previous notice. It is prohib- ited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown. Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided. If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you. Send an e-mail to: [email protected] or use our contact form: https://www.wiltec.de/contacts/ The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch Our postal address is: WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany Do you wish to pick goods up? Our pick-up address is: WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or placing your order via the webshop. E-mail: [email protected] Tel:+49 2403 55592-0 Fax: +49 2403 55592-15 To return orders for exchange, repair or for other purposes, please use the following address. Atten- tion! To allow for a smooth execution of your complaint or return, it is important to contact our cus- tomer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: [email protected] Tel:+49 2403 55592-0 Fax: +49 2403 55592-15 © by WilTec Wildanger Technik GmbH Article 61343 Seite 2 http://www.WilTec.de http://www.aoyue.eu 10 2020-1 http://www.teichtip.de Introduction Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli- ents take some basic safety precautions when using this device. Please read the operation in- structions carefully and make sure you have understood its content. Keep these operation instructions safe. Safety Instructions Warning! Switch off or disconnect the unit from the air supply before carrying out maintenance or re- pair work or when the unit is not in use. Warning! This blasting machine produces granular dust which can damage the surface finish and damage moving parts. It is recommended that sandblasting be carried out in a special room free from materials that can be damaged or soiled. If this is not possible, make sure that the exposed surfaces and moving parts are adequately covered.  Make sure that your work area is tidy and that there is adequate lighting. Obstructed or poorly lit work areas increase the risk of injury.  Wear approved protective equipment (protective gloves, ear protection, safety goggles and breathing protection) during work.  Make sure you have a secure footing and keep your balance while working. Wear slip-resist- ant footwear.  Keep the machine and all components clean and in good conditions to ensure a safe working environment with the best results.  Replace defective or worn parts immediately. Only use original spare parts. The use of unau- thorised spare parts can be dangerous and may invalidate the warranty.  Wear suitable workwear. Avoid loose clothing and jewellery. Tie long hair securely together.  Always keep the blasting nozzle pointed at the workpiece.  If a fault or malfunction occurs, disconnect the unit from the air supply immediately.  Keep other people (including children) and animals away from your working area. Contact with a high-pressure jet or inhalation of the generated dust is dangerous. If other persons are re- quired near the work area, they must wear protective equipment similar to that of the operator.  Only use the blasting machine for its intended purpose. Improper use can lead to damage of property and personal injury.  Do not try to clean a clogged nozzle while the machine is under pressure.  Do not allow untrained persons to operate the machine.  Do not leave the running blasting machine unattended.  Do not stand on the machine.  Do not direct the air from the air hose at yourself, other people or animals.  The maximum working pressure as well as the maximum air supply of the device must not be exceeded. © by WilTec Wildanger Technik GmbH Article 61343 Seite 3 http://www.WilTec.de http://www.aoyue.eu 10 2020-1 http://www.teichtip.de  Do not use the machine if parts are missing or damaged. This may result in malfunction and/or personal injury.  Keep the unit away from liquids, damp or wet environments and places where there is con- densation.  Do not use the machine if you are tired or under the influence of alcohol, drugs or medication that impairs consciousness. Technical Data Working pressure 3-4 bar Size of granulate tank 850 ml Air requirement 56-113 l/min Connection Compressed air coupling plug nipple NW7.2 Blasting material Suitable for normal corundum grain size 46-100 Weight 3,5 kg Accessories 1 x sandblasting gun with suction hopper (bottom feed) 1 x bag to collect granulate 4 x mouthpieces (in different designs) 1 x 800 g blasting material in a practical container Air supply Attention! Make sure that the air supply does not exceed 50 PSI (3.44 bar) while you are using the device. Excessive air pressure will shorten the life of the device due to excessive wear and tear and may cause damage to property and/or personal injury. • Make sure that the pistol trigger is in the "off" position before connecting it to the air supply. • If possible, the compressor should be placed in a separate room, while keeping the connect- ing line as short as possible. The compressor should have an air filter and a water separator (see figure 1). • Empty the air reservoir of the compressor daily. Water in the air hose will damage the device. • The recommended connection procedure is shown in Figure 1. Fig. 1 © by WilTec Wildanger Technik GmbH Article 61343 Seite 4 http://www.WilTec.de http://www.aoyue.eu 10 2020-1 http://www.teichtip.de