Windsor CLP12 Manuals

Read these instructions before operating the machine MODEL: CLP12 Operating Instructions 98630 08/19/03 EE CARPET EXTRACTOR TABLE OF CONTENTS CLIPPER 98630 10/19/02 1 Data Log/Table of Contents..............1 Safety Instructions............................2 Grounding Instructions .....................3 Controls............................................4-6 Operations........................................7-13 Troubleshooting................................14 Wiring Diagram.................................15 Maintenance .................................... 16-18 Technical Specifications................... 19 Service Schedule............................. 20 Parts Lists........................................ 21-34 Spare Parts/Notes............................ 35 Warranty ....................................... 36 INSPECTION Carefully unpack and inspect your machine for shipping damage. Each unit is operated and thoroughly inspected before shipping, and any damage is the responsibility of the carrier, who should be notified immediately. MODEL DATE OF PURCHASE SERIAL NUMBER SALES REPRESENTATIVE # DEALER NAME SAFETY INSTRUCTIONS CLIPPER 98630 12/14/98 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. This machine is for commercial use. To reduce the risk of fire, electric shock, or injury: Connect to a properly grounded outlet. See Grounding Instructions. Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or service. Use only indoors. Do not use outdoors or expose to rain. Do not allow machine to be used as a toy. Close attention is necessary when used by or near children. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center. Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run machine over cord. Keep cord away from heated surfaces. Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord. Do not handle the electrical plug or machine with wet hands. Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow. This machine is intended for cleaning carpet only. Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. This machine is not suitable for picking up health endangering dust. Turn off all controls before unplugging. Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors. This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes. Maintenance and repairs must be done by qualified personnel. If foam or liquid comes out of machine, switch off immediately. SAVE THESE INSTRUCTIONS ! WARNING:

Read these instructions before operating the machine MODEL: CLP12 10080250 Operating Instructions 86038240 09/22/11 PRV NO. 98630 AD CARPET EXTRACTOR C US 3146518 MACHINE DATA LOG/OVERVIEW CLIPPER 86038240 1 Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product. To register your product go to: www.windsorind.com/WarrantyRegistration.aspx For customer assistance: 1-800-444-7654 TABLE OF CONTENTS CLIPPER 86038240 2 Machine Data Log/Overview.........................1 Table of Contents..........................................2 HOW TO USE THIS MANUAL How to use this Manual.................................1-1 SAFETY Important Safety Instructions ........................2-1 Hazard Intensity Level ..................................2-3 Grounding Instructions..................................2-5 OPERATIONS Technical Specifications. ..............................3-1 Controls/Component Location ......................3-2 Filling Operation............................................3-5 Operations. ...................................................3-6 Cleaning Procedure. .....................................3-8 Accessory Tool Usage................................ 3-11 MAINTENANCE Service Schedule..............................……… 4-1 Periodic Maintenance. ..................................4-2 Daily/ Regular Maintenance..........................4-2 Vacuum Motor Replacement ........................4-3 Belt Replacement..........................................4-4 Solution Pump Replacement ............……… 4-5 Wiring Diagram. ............................................4-6 Troubleshooting Chart ..................................4-7 GROUP PARTS LIST Frame Assembly......................................... 5-1 Brush Assembly.......................................... 5-3 Pump Assembly.......................................... 5-5 Vacuum Shoe Assembly............................. 5-7 Control Panel Assembly.............................. 5-9 Solution Tank Assembly. ............................ 5-11 Recovery Tank Assembly. .......................... 5-13 Suggested Spare Parts/Notes .................... 5-15 HOW TO USE THIS MANUAL CLIPPER 86038240 1-1 This manual contains the following sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model and serial number of your machine is on the bottom back-end of the machine. The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards is identified that could result in product or personal injury, or severe injury resulting in death. The OPERATIONS section is to familiarize the operator with the operation and function of the machine. The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order: - Periodic - Daily/Regular - Troubleshooting The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information: - REF – column refers to the reference number on the parts illustration. - PART NO. – column lists the part number for the part. - PRV NO. – reference number. - QTY – column lists the quantity of the part used in that area of the machine. - DESCRIPTION – column is a brief description of the part. - SERIAL NO. FROM – column indicates the first machine the part number is applicable to. When the machine design has changed, this column will indicate serial number of applicable machine. The main illustration shows the most current design of the machine. The boxed illustrations show older designs. If column has an asterisk (*), call manufacturer for serial number. - NOTES – column for information not noted by the other columns. NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. NOTE: The number on the lower left corner of the front cover is the part number for this manual.