Winners Only GP366R Manuals

29PCS Machine Bolts (1-1/4") 2 PCS Metal Grommet 8 PCS Long( 1-1/4") Flat Head Wood Screws 2 PCS Keys For File Drawer Lock 20 PCS Short (3/4") Flat Head Wood Screws 6 PCS Wood Dowels ( �8x25mm) Thank you for purchasing Winners Only Inc. product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions. If a part or hardware is missing or you have any difficulties in assembling this product, please contact us. Those are the non included tools needed to successfully assemble your new desk: Phillips screw driver or Power Drill (recommended). Mallet. IMPORTANT NOTE : Please keep all hardware parts out of the reach of children. RHS GLIDE PANEL BACK PANEL R1 DESK TOP B A 1 PC 1 PC C 1 PC R1B PEDESTAL E D 1 PC F 1 PC RSF SIDE PANEL CROSS BAR H 1 PC G 1 PC I 1 PC L-SHAPED RHS PANEL R2 DESK TOP J 1 PC 1 PC K 1 PC M L 1 PC 1 PC N 1 PC O L-SHAPED LHS PANEL 1 PC R2B PEDESTAL KEYBOARD PULLOUT CROSS BAR BACK PANEL DROP FRONT CENTER DRAWER BACK PANEL EXTENSION A B C L D E F G H I J K M N O GP366RT Parts List GP366RB2 Parts List Hardware List (included in GP366RB1) GP366RB1 Parts List Notes: Need two people to assemble. 1 1 2 Instructions: Chart 1 Step 1. Align the R1B pedestal (A) & back panel extension (F) to the back panel (E), insert and tighten with 1-1/4" machine bolts (6PCS). Chart 2 Step 2. Align the back panel extension (F) to the RSF side panel (G) and the L-shaped RHS panel (I) to the RSF side panel (G), insert and tighten with 1-1/4" machine bolts (6PCS). 2 2 2 1 1 1 1 2 2 5 5 5 5 6 6 6 3 4 3 2 X4 X4 X12 X1 Chart 3 Step 3. Use 1-1/4" machine bolts (4PCS) to connect RHS glide panel (D) to L-shaped RHS panel (I) and back panel (E). Step 4. Using a Mallet, carefully insert Cross Bar (H) to the R1B pedestal (A) and RHS glide panel (D), tighten with 1-1/4" flat head wood screws (2 PCS) to Cross Bar (H) from R1B pedestal (A) side and from RHS glide panel (D) side. Step 5. Hammer the wood dowels (4 PCS) on the R1B pedestal (A) and RSF side panel (G). Step 6. Loosen the screw to adjust metal figure 8 (12 PCS) of its direction of the panel and re-screw. H D I G 4 X1 3 Remove strap 4 10 11 11 Chart 4 Step 7. Align the R2B pedestal (K) & L-shaped LHS panel (O) to the back panel (N),insert and tighten with 1-1/4" machine bolts (6PCS). Step 8. Using a Mallet, carefully insert Cross Bar (M) to the L-shaped LHS panel (O) and R2B pedestal (K), tighten with 1-1/4" flat head wood screws (2 PCS). 10 10 10 11 10 10