York MP SERIES Manuals

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE 5006167-YTG-F-0517 TECHNICAL GUIDE MODULAR PSC AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS MODELS: MP SERIES Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at: www.upgnet.com and www.york.com Additional rating information can be found at: www.ahridirectory.org WARRANTY SUMMARY Standard 5-year limited parts warranty. Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction. ® DESCRIPTION This unique modular system allows the flexibility to handle any application. These versatile MP blowers may be used for upflow, downflow, or horizontal left or right applications. They may be combined with cased coils to function as a cooling only unit or with a heat pump including electric heat for 1 and 3 phase applications. FEATURES COMMON MP AIR HANDLER AND MATCH-UP CM COIL Rigid Case Construction - An interior endoskeleton for structural support, smooth sides, and locks in insulation. Powder-painted - G30 galvanized steel case provide a coated edge that resists corrosion and rust creep. Quality Construction - Structural components are made of Aluminum or G90 galvanized steel to prevent corrosion. Improved Insulation Design - Single piece with no external screws to reduce thermal transmission paths to prevent sweating. Foil faced insulation for ease of cleaning. Case Depth - These models have 20.5” casing which provide ease of attic access and tight applications. MP AIR HANDLERS Factory Sealed - Achieves 2% or less total airflow leakage rate at duct leakage test conditions in positive and negative pressure for system airflow verification. Electric Heat Kits - 6HK series of field installed electric heat kits are available for installation-friendly and easy service applications. Blowers - All models use direct-drive, multi-speed PSC motors. CM COILS MaxAlloyTM Coil - Long life aluminum coils built to deliver lasting performance, efficiency and reliability. Thermostatic Expansion Valve - The accessory chatleff style TXV provides easy installation to convert the indoor coil to the required refrigerant that does not require brazing to replace or install. Some models are available with factory installed TXV. Thermoset Drain Pan - Low retention and positive slope for drainage to reduce potential mold or contaminants. Accessories - A full line of matching accessories available for use with the blower and coils to provide for any type of application.