Zoom 4402 Manuals

3 If you are connecting a network device such as a wireless access point or switching hub, set up your network device by using the instructions that came with that device. Then reboot any computer that is part of your network. For example, if you connected a wireless access point, reboot any computer that will make a wireless connection to that wireless access point. 8 0 2 . 1 1 N W I R E L E S S R O U T E R If you selected L2TP or PPTP: Q U I C K S T A R T Please refer to the User Manual on the CD. 3 LAN IP Page: This Quick Start describes how to connect the 802.11n Wireless Router to a computer, game station, HomePlug adapter pair, wireless access point, switching hub, or other device. First the 802.11n Wireless Router is configured using a Windows®, Macintosh®, or Linux computer; then the 802.11n Wireless Router is connected to one or more computers or other devices. More detailed information, including information about advanced features, is in the 802.11n Wireless Router User Manual. Most users don’t need to change their LAN IP unless the ADSL or cable modem is using the same one. This page also lists the Subnet Mask. 4 If you are connecting a HomePlug adapter pair with one adapter plugged into the 802.11n Wireless Router and an AC outlet, and the other adapter plugged into a computer or game station and an AC outlet, make those connections and then go to step 5. Click Next. 4 Wireless Network: 5 Verify that your Internet connection is working. Open a Web browser (e.g., Internet Explorer or Mozilla Firefox) on each computer using your network and try to connect to a familiar Web address. SSID: Select the name of your wireless network. (Default: Zoom) Step 1: Connecting the Router to a Computer Security Mode: Select from the following options: 1 Place the 802.11n Wireless Router near a computer to be used for setup. That computer needs an Ethernet (LAN) port. Note: If at any time you need to make changes to the 802.11n Wireless Router configuration, open a web browser from any PC on your 802.11n Wireless Router’s network and type 192.168.2.1 to open the Setup pages. Alternately, you can connect a computer directly to the 802.11n Wireless Router, open its browser, and then type 192.168.2.1. Note also that you can configure the Advanced Wireless Settings section of the 802.11n Wireless Router Setup pages to permit configuration from a remote location. o None (the default): Select this if you don’t plan to use wireless security or if all the devices on your network support WPS and you wish to use WPS to set up wireless security. 2 Turn off the computer. o WEP: You must select this option if you have devices on your network that only support WEP. Otherwise we recommend WPS or WPA-2 Auto-Personal. (Devices that only support WEP include older handheld game consoles, older MAC notebooks, and very old Windows notebooks. If you need to use WEP, please refer to the User Manual on the CD.) 3 Attach the antenna to the Router. (Remove the antenna from the package. Screw-on the antenna into the mount on the back panel of the router.) 4 Connect one end of the supplied Ethernet cable to the computer’s Ethernet port and the other end to any of the 802.11n Wireless Router’s LAN ports. 6 Congratulations! You have connected an additional device to the Internet. You can add up to 4 directly connected devices to the 802.11n Wireless Router, following the instructions above for each device and starting at step 2 of this section. 5 Plug the supplied power cube into the 802.11n Wireless Router, and then into a power outlet. o WPA-2 Auto-Personal: If one or more of the devices on your network do not use WPS, this is normally a good option. If you selected WPA-2 Auto-Personal, the WPA Encryption and Pass Phrase fields appear. Important: Use only the power cube shipped with the 802.11n Wireless Router. Other power cubes may damage the device. Gaming 6 Turn on the computer. The PWR LED � WPA Encryption: Leave this at TKIP+AES (the default) so you can connect to both WPA/WPA2 devices. If you are using your router for gaming, you may need to make changes to the router’s firewall setting for the game to work. This is done by either setting up a DMZ, a virtual server, or using port triggering. Please see the User Manual on the CD to decide which option to select and instructions on setting it up. on the 802.11n Wireless Router front panel should turn on. The connected LAN port LED will become steady on. � Pass Phrase: You need to enter a Pre-shared key containing 8 to 63 characters and then enter this Pass Phrase onto each client device. (If you leave this field blank, the system will assign [00000000] as your Pass Phrase. 7 If you want the 802.11n Wireless Router to have access to the Internet, connect its WAN port to the Ethernet port on a working cable modem, ADSL modem, or other broadband device. (You can check that the modem is working by connecting it to a computer and using the Internet.) Advanced Features For information about all the options on the 802.11n Wireless Router menu, please refer to the User Manual on the CD. When you connect the wireless router to a working modem, the WAN LED turns on if the modem is on and its Ethernet port is working. Click Apply to save your settings. Troubleshooting Tips For Troubleshooting Tips, please refer to the User Manual on the CD. Using WPS to set up your wireless network Step 2: Establishing Communication If You Need Help If all the devices on your network support WPS, you may be able to set up security by simply pushing some buttons. Some may be software buttons. 1 Open your Web browser, enter 192.168.2.1 in the address bar, and press the Enter key to open the 802.11n Wireless Router configuration software. We encourage you to register your product and to notice the many support options available from Zoom. Please go to www.zoom.com and select Technical Support. From here you can register your router and/or contact our technical support experts and/or use our intelligent database SmartFacts (In the unlikely event that you already have a network configured with WPS and would like to configure WPS, there are additional ways including using the AP PIN code or Client PIN code. For details on these additional options, please refer to the User Manual on the CD.) tm and/or get warranty information. 2 In the Enter Network Password dialog box, type the following User Name and Password in lower case, then click OK. Regulatory Information U.S. FCC Part 15 Emissions Statement User Name: admin This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: − 1 Press the WPS pushbutton on the back panel of the router in for 5 seconds. Password: admin 2 Within 2 minutes, press the WPS button on the client device (either a physical pushbutton on the device or a button in the client’s software page). 3 The Status page should appear. Proceed to Step 3: Configuring Your Wireless Router. If the Status page doesn’t appear, please see the Troubleshooting Tips in the User Manual on the CD. Reorient or relocate the receiving antenna. 3 Congratulations! You should now have a secure connection between the router and client device. Now is a good time to check that your device’s Internet connection is working. − − − Increase the separation between the equipment and receiver. Step 3: Configuring Your Wireless Router Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4 If you have other client devices whose WPS security you need to set, repeat steps 1 through 3 for each device. When they are all set, go to step 5. Consult the dealer or an experienced radio/TV technician for help 1 In the ADMINISTRATOR’S MAIN MENU, select Wizard. Electrostatic Discharge Statement The unit may require resetting after a severe electrostatic discharge event. 2 Select your WAN connection type: 5 Your basic setup is complete, you don’t need to keep the 802.11n Wireless Router plugged into the setup computer. Safety Notice Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. • Dynamic IP (Auto Config): Select this if you are using a cable modem or if your ADSL modem does not use PPPoE. Most users will select this. (If you have an ADSL Declaration of Conformity modem that needed a User Name and Password, you are using PPPoE.) Declaration of Conformity Déclaration de conformité Konformitätserklärung If you don’t use WPS to set up your wireless network • PPPoE (ADSL): Select this if you are using an ADSL router with PPPoE. • Static Mode (fixed IP): Typically you must request and pay extra for a static IP. In the unlikely event that you have done this, select Static Mode. • L2TP: In the unlikely event that you are using a VPN to access a network that uses Layer 2 Tunneling Protocol, select this option. • PPTP: In the unlikely event that you are using a VPN that uses Point to Point Tunneling Protocol, select this option. Click Next. If you selected Dynamic IP: Enter Host Name if given one (most users won’t have to). MTU: Most users should leave this at the default. Click Next to go to the LAN IP page. If you selected PPPoE: Enter the User Name and Password provided to you by your ISP. If you don’t know these, contact your ISP. Verify Password: Re-enter the Password here. MTU: Most users should leave this at the default. Service Name: Enter the PPPoE service name if you were provided one. Most users can leave this blank. Connection Control: Leave Auto Reconnect to keep your PPP connection up (most users). Click Next to go to the LAN IP page. If you selected Static Mode: Enter the IP Address, Subnet Mask, Default Gateway, Primary DNS and Secondary DNS addresses that were provided to you by your ISP when you signed up for a static IP address. MTU: Most users should leave this at the default. Click Next to go to the LAN IP page. You need to use the same security mode you select for your wireless router for each wireless device using the router. If a Pass Phrase or WEP key is used, it needs to be the same for all devices including the router. Testing your wireless computers and other wireless clients Open your browser and go to a website to test your wireless setup. If it works, congratulations! If it doesn’t, please see Troubleshooting Tips in the User Manual on the CD. Read This Only if You Are Connecting Additional Computers and/or Other Devices to the Wireless Router’s LAN ports You can plug up to four computers, game consoles, or other devices into the 802.11n Wireless Router’s LAN ports. The 802.11n Wireless Router can also link wireless devices to your network. This section provides general instructions for connecting the 802.11n Wireless Router to additional computers, game stations, HomePlug adapter pairs, network devices such as a wireless access point or a switching hub, or a combination of the above. For information about setting up your specific device, please refer to the documentation that came with that device. Follow the instructions below for each computer or other device. 1 In setting up the 802.11n Wireless Router, you connected the 802.11n Wireless Router to a computer. Unplug the computer now if you don’t want it to stay connected to the 802.11n Wireless Router. 2 To connect another computer or network device or gaming station, plug one end of an Ethernet cable into an available Ethernet port on the 802.11n Wireless Router and plug the other end of the Ethernet cable into the Ethernet port of the additional device you want to connect to the 802.11n Wireless Router. (For a hub or a switch, this is typically called an Uplink or Expansion port. For a router or wireless access point, this is typically called a WAN port.) If you are connecting a computer or game station, go to step 5 of this section. Δήλωση Συμμόρφωσης Dichiarazione di conformità Deklaracja zgodności Declaração de Conformidade Declaración de conformidad Konformitetsdeklaration Uyum Beyanatı Cam kết về sự tuân thủ ở Châu Âu Zoom Telephonics, Inc. 207 South Street, Boston, MA 02111 USA 617-423-1072 www.zoom.com Manufacturer/Producent/Fabrikant/Constructeur/Hersteller/Κατα σκευαστής/Fabbricante/Fabricante/Tillverkare/Üretici/Nhà sản xuất Zoom 802.11n Wireless 4Port Router Brand/Varemærke/Merk/Marque/Marke/Μάρκα/ Marchio/Marka/Marca/Märke/Thương hiệu Series 1080, Model 4402XY, where X=A,B,C,D,E,F,G or Nothing and Type/Typ/Μάρκα/Tipo/Türü/Kiểu mẫu Y=A,B,C,D,E,F,G or Nothing The manufacturer declares under sole responsibility that this equipment is compliant to Directive 1999/5/EC via the following. This product is CE marked. Producenten erklærer under eneansvar, at dette udstyr er i overensstemmelse med direktivet 1999/5/EC via følgende. Dette produkt er CE-mærket. De fabrikant verklaart geheel onder eigen verantwoordelijkheid dat deze apparatuur voldoet aan Richtlijn 1999/5/ EC op grond van het onderstaande. Dit product is voorzien van de CE-markering. Le constructeur déclare sous son entière responsabilité que ce matériel est conforme à la Directive 1999/5/EC via les documents ci-dessous. Ce produit a reçu le marquage CE. Hiermit erklärt Zoom die Übereinstimmung des Gerätes router mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EC. Dieses Produkt ist das gekennzeichnete CE. Ο κατασκευαστής δηλώνει με αποκλειστική του ευθύνη ότι αυτό το προϊόν συμμορφώνεται με την Οδηγία 1999/5/ΕC μέσω των παρακάτω. Αυτό το προϊόν φέρει τη Σήμανση CE. Il fornitore dichiara sotto la sola responsabilità che questa apparecchiatura è compliant a 1999/5/EC direttivo via quanto segue. Questo prodotto è CE contrassegnato. Producent stwierdza że to urządzenie zostało wyprodukowane zgodnie z Dyrektywą 1999/5/EC. Jest to potwierdzone poprzez umieszczenie znaku CE na urządzeniu. O fabricante declara sob sua exclusiva responsabilidade que este equipamento está em conformidade com a Directiva 1999/5/EC através do seguinte. Este produto possui Marcação CE. El fabricante declara bajo su exclusiva responsabilidad que este equipo satisface la Directiva 1999/5/EC por medio de lo siguiente. Este producto tiene marca CE. Bu ürünün imalatçısı tüm sorumluluk kendisinde olmak kaydıyla bu cihazın aşağıdaki tabloda gösterilen biçimde 1999/5/EC (R&TTE Yönetmeliği) no.lu Yönetmeliğe uygun olduğunu beyan etmektedir. Bu ürün CE İşareti taşımaktadır. Nhà sản xuất cam kết với trách nhiệm của mình là thiết bị này tuân theo Hướng dẫn 1999/5/EC thông qua các mục sau. Sản phẩm này được đánh dấu là CE. 73/23/EEC – LVD EN 60950-1: 2006+A11:2009 EN 301 489-1 v1.8.1: 2008 EN 301 489-17 v2.1.1: 2009 89/336/EEC – EMC EN 55022:2006 + A1: 2007 EN 55024:1998 + A1: 2001 +A2: 2003 EN 300 328 v1.7.1: 2006 1999/5/EC EN 62311: 2008 Director, Hardware Engineering/Direktør, Hardware Engineering/Director, Sustaining Engineering/Directeur, ingénierie de soutien/Direktør, Sustaining Engineering/ Διευθυντής, Μηχανικής Διατήρησης/Direttore, Hardware Engineering/Dyrektor, Inżynieria ciągła/Director, Engenharia de Manutençã/ Director, Ingeniería de apoyo/Donanım Mühendisliği, Müdür/Giám Đốc Kỹ thuật Phần cứng Paul Prohodski 15 June 2010 1080TF, Boston, MA, USA 1660-B 27630-2 ©2010

• Connects to an ADSL Modem or Cable Modem for shared Internet access • Router supports networks with up to 253 computers and other devices • High data speeds and extended wireless coverage • Provides advanced network security and easy setup Model 4402 International Headquarters Zoom Telephonics, Inc. 207 South Street Boston, MA 02111 USA Tel: 617 423-1072 Fax: 617 423-3923 email: [email protected] www.zoom.com OTCBB: ZMTP European Sales/Support Zoom Telephonics, Inc. Central House 2 Kings Road Fleet, Hants GU51 3AD UK Tel: +44 (0) 1252 625323 Fax +44 (0) 1252 617920 ©2010 Zoom Telephonics, Inc., 207 South Street, Boston, MA 02111 USA Zoom is a registered trademark of Zoom Telephonics, Inc. Windows 2000, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other registered trademarks and trademarks used herein are the property of their respective holders. combines 4-port Ethernet Switch, Wireless-N Access Point, and More Wireless-N Router The Model 4402 wireless-N router is an excellent choice for almost any home or business. It supports high data speeds, a wide wireless coverage area, and up to 253 users. The Model 4402 connects easily to a broadband modem to provide shared Internet access to all the computers and other devices on its network. It features all the popular forms of wireless security, Wi-Fi Protected Setup (WPS), and local or remote configuration using a browser. And it’s supported by Zoom Telephonics, a US-based leader in communication products since 1977. • Typically connects to the Ethernet port of an ADSL Modem, Cable Modem, or other broadband modem to provide shared Internet access • Built-in wireless-N router supports 802.11 n, g, b, and mixed wireless networks • Built-in 4-port Ethernet switch allows direct connection of computers, Ethernet switches, HomePlug ® adapters, and other network devices. • Wireless data speeds up to 150 Mbps even without compression • Wireless range is typically up to 1000 feet (304 meters) outdoors. Indoor range varies depending on walls and other obstructions. • Can be configured as a Wireless Repeater to extend the reach of your network • High security with WPS, 64 and 128 bit WEP, WPA, WPA2, NAT, SPI, protection from Denial of Service (DOS) attacks, MAC/ Port/IP filtering, and URL blocking • Includes detachable external antenna to allow easy attachment of a special purpose antenna for the extraordinary situations where this is required • Easy Installation and Setup with Universal Plug and Play and built-in setup wizard • Highly interoperable product works with ADSL modems, Cable modems, WiMAX modems, Windows ® and Macintosh ® computers, Wi-Fi ® compatible phones including the iPhone ® and Blackberry ®, the iPod ® Touch, Nintendo ® DS, PlayStation PSP, HomePlug ® adapters, VoIP adapters, and more. • 1 year warranty and support by Zoom Telephonics, a communication products leader since 1977

802.11n Wireless Router U S E R M A N U A L