Zoom 4402 Operation & User’s Manual

Contents Overview: How to use the User Manual ........................ 5 Gaming........................................................................... 5 Configuring security for the iPhone®, iPod touch®, and other wireless devices.................................... ...

MAC Filtering................................................................ 38 LAN to WAN filter ......................................................... 39 Advanced: Toolbox ....................................................... 40 DDNS .................................. ...

Package Contents The 802.11n Wireless Router package contains the following: • 802.11n Wireless Router • Antenna • Power cube • Ethernet cable • Quick Start • CD containing warranty information and this User Manual If anything is missing or damaged, please con ...

User Manual This User Guide provides instructions for connecting and configuring your 802.11n Wireless Router and setting up wireless and wired local area networks. It also includes details about security, firewalls, Virtual Private Networks and administrative tasks. If you have set up your router and successfully established a con ...

triggering so that the modem’s firewall won’t block the other players from your system during your gaming. The main difference between the three methods is the amount of access someone has to your system. A virtual server will allow access to your computer or gaming s ...

iPhone®, iPod touch®, and other wireless devices If you are using your iPhone® or iPod touch® with your router, we recommend you use WPA if the rest of your network supports it. In that case you need to know your wireless network's Pass Phrase. If you must use WEP because some devices on your network only support WEP, Appl ...

Wireless Router This chapter provides basic instructions for connecting the hardware and configuring the 802.11n Wireless Router using the Wizard. If you have already done this by following the instructions in the printed Quick Start, skip to Chapter 2, Advanced: Basic Settings. Step 1: Connecting the Router to a Computer 1 Place the ...

connecting it to a computer and using the Internet.) When you connect the wireless router to a working modem, the WAN LED turns on if the modem is on and its Ethernet port is working. Step 2: Establishing Communication 1 Open your Web browser, enter 192.168.2.1 in the address bar, and press the Enter key ...

Click Next. If you selected Dynamic IP: Enter Host Name if given one (most users won’t have to). MTU: Most users should leave this at the default. Click Next to go to the LAN IP page. If you selected PPPoE: Enter the User Name and Password provided to you by your ISP. ...