PDQ Manuals
35 PDQ Guides, Service Instructions (25 Models)
PDQ Categories:
| Type | Models | Devices | Documents |
|---|---|---|---|
| Safety Equipment | 6300 | 1 | 1 |
| Locks | KMS STS pdqSMART, 6200 Series, SX Series, CLS | 8 | 8 |
| Door Opening System | 5300, 6EWS STS, 3100, 3100 | 8 | 15 |
| Door Locks | 135, 5300, 93203, pdqSMART SDS | 8 | 9 |
| Network Router | Smart | 1 | 1 |
| IP Access Controllers | 85001 | 1 | 1 |
PDQ Documents:
3100 DOOR CLOSER MODELS TOP JAMB INSTALLATION - PUSH SIDE - PIVOT STOP (PS) ARM APPLICATIONS INSTRUCTION: 319356 REV.0 04-09-20 MACHINE SCREWS: USE #7 OR 13/64" [5.1] DRILL AND 1/4-20 TAP WOOD DOOR/FRAME SCREWS: USE 5/32" [4] DRILL SEX NUTS: USE 3 Product reference manual for the PDQ 3100 Door Opening System. This reference manual outlines software updates, software configuration, product specifications, product handling.
NON-HOLD OPEN AND HOLD OPEN APPLICATIONS - 120° MAX 7101 DOOR CLOSER INSTRUCTION SHEET TOP JAMB INSTALLATION - PUSH SIDE (FLUSH HEADER OR SINGLE RABBET FRAME) CLOSER BODY (LEFT HAND DOOR) CLOSER BODY (RIGHT HAND DOOR) MACHINE SCREWS: USE #7 OR 13/64" [5.1] DR Setup and usage guide for the PDQ 7101 Door Opening System. It explains usage scenarios and technical guidelines, maintenance procedures, maintenance schedule, maintenance.
1. DOOR PREPARATION Prepare the door for the mortise lock. Generic template in box, function specific templates located at www.pdqlocks.com Install the mortise case and secure using two (2) #12-24 combo screws supplied in the hardware kit, W51440. 2. J Device operation guide for the PDQ MR Door locks. This manual describes setup, usage, and component overview, shutdown procedures, assembly reference, maintenance.
1 6300/6400V/VF EXIT INSTALLATION INSTRUCTION SVR DEVICE Phone: 833-2-PDQTEC | www.pdqlocks.com 2. SIZE DEVICE Standard lengths are for 36" or 48" door. Device must be cut for other lengths. Mark length with tape – length equals desired door size sub Quick reference guide for the PDQ 6300 Door Opening System. It explains operation, maintenance, and device calibration, error handling, connectivity setup, system checks.
MRS pdqSMART INSTALLATION INSTRUCTION MORTISE LOCK ALL MRS – EXCLUDING STS Phone: 866-874-3662 | www.pdqlocks.com 1. CHECK HANDING OF LOCK BODY If handing of lock body is not correct for opening, consult factory for handing instruction. 3. INSTALL READER Complete device guide for the PDQ MRS pdqSMART Locks. It outlines the setup and safety information, connectivity options, safety guidelines, product maintenance.
Operating Voltage 12VDC,24VDC,12/24VDC Voltage Tolerance ±15% Current Draw 0.25A/12VDC 0.15A/24VDC Operating Temperature 14 – 110 degrees F Humidity 0-95% For PDQ GR1 and GR2 Cylindrical Locks Faceplate Door Stop Latch Opening Base Cable 2 x M4x0.7 Screw(s) Instructions for safe usage of the PDQ 85001 IP Access Controllers. This manual covers installation, operation, and repair references, performance guidelines, startup procedures.
PACKAGE CONTENTS 1: PDQ Smart Ethernet Bridge 2: Ethernet Cable (1 Meter long) 3: BLE Antenna 4: Power Supply 5V@1A 5: Quick Start Guide PREREQUISITES 1: Active PDQ Smart Server Account - https://portal.pdqlocks.com 2: Install PDQ Smart App on Smartphone 3: User handbook for the PDQ Smart Network Router. It explains maintenance and basic operation, maintenance procedures, performance optimization.
6EWS STS - EXIT DEVICE TRIM INSTALLATION INSTRUCTION Phone: 866-874-3662 | www.pdqlocks.com 1. PREPARE TRIM FOR INSTALLATION Rotate lever to proper orientation for door, install square drive spindle into back of trim. 3. RIM DEVICE - INSTALL CONTROL BOARD Operating instructions for the PDQ 6EWS STS Door Opening System. This guide provides technical guidance on error handling, replacement parts, troubleshooting, operating conditions.
MACHINE SCREWS: USE #7 OR 13/64" [5.1] DRILL AND 1/4-20 TAP WOOD DOOR/FRAME SCREWS: USE 5/32" [4.0] DRILL SEX NUTS: USE 3/8" [9.5] DRILL FOLD BACK TO 120° MAX TO 180° MAX FOLD AT HINGE/PIVOT CENTERLINE FOR THE REQUIRED OPENING ANGLE . BRACKET (LH DOOR) FO User guide for the PDQ 5100 Series Door locks. This manual offers stepwise instructions for product maintenance, software updates, installation steps.
CL HINGE OR PIVOT 1 3/4" [44.5] 3/4" [19.1] 12" [304.8] A B 1 1/8" [28.6] BOTTOM OF FRAME FACE 5300/5500 DOOR CLOSER MODELS REGULAR ARM INSTALLATION - PULL SIDE - PIVOT STOP (PS) ARM APPLICATIONS INSTRUCTION: 539355 REV.0 10-01-19 NOTES: 1. DO NO User guide for the PDQ 5300 Door Opening System. This manual provides guidance on installation support, troubleshooting, installation guides, testing procedures.