KStar GP800 Operation & User’s Manual

Contents CONTENTS............................................................................................................I 1 BRIEF INTRODUCTION.............................................................................1 1.1 PROLEGOMENON ......................................................................................1 1.2 ...

7.2 UPS RUNNING WAY WHEN UPS RUNS NORMALLY...................................28 7.3 UPS RUNNING WAY WHEN UTILITY DISCONNECTED ................................29 7.4 UPS RUNNING WAY WHEN UPS RUNS ON BYPASS MODE .........................29 7.5 BATTERY AND CHARGE ...................................................................... ...

1 BRIEF INTRODUCTION 1.1 Prolegomenon The product is designed specially aiming at the requirement of MINI and MICRO level computer with exquisite quality and excellent function, easy to operate. With the development of customer office automatism and computerism, considering the bulk and the position of positing space, the n ...

shock 6. Please charge batteries once every a period if no used for long time 7. Do not use UPS on the condition of overload to avoid UPS fault 8. Please carefully keep the manual for the future reference 9. Please handle the system according to “ABNORMITY HANDLING PROCESS” if there presents any abnormal phenomenon in m ...

- 3 - 2 CONFIGURATION AND FUNCTION 2.1 Front panel OUT IN BATT B Y FAULT Off Down On Switch ON Cycl e di spl ay button LCD Faul t i ndi cator Bypass i ndi cator Output i ndi cator battery energy i ndi cator Input i ndi cator Swi tch OFF Welcome screen WELCOME TO × × × × × × × × × 1) Display ...

GP800 UPS - 4 - 4) Display of input frequency value ON LINE OUTPUT: 220V 5) Display of output frequency value ON LINE OUTPUT FRE: 50HZ 6) Display of output power Percent ON LINE LOAD: 100% 7) Display of battery voltage value ON LINE BATTERY: 218V 8) Temperature display in machine ON LINE TEMP: 33℃ *These param ...

- 5 - Figure 2 Front panel Figure 3 Front panel ① Emission heat ventilation hole: The ventilation hole and other small long elliptic ventilation holes should be kept good ventilation. ② Wiring inlet/outlet hole: Wiring inlet/outlet hole of input, output and battery pack. ③ RS232 communication interface receptacle St ...

3 PLACEMENT NOTES 3.1 Transit or move 1. Please dismantle all barge connection firstly. (First turn off before performing) 2. Place lightly and carefully, forbid to hit. 3. Please do not move UPS inverted. 3.2 Placement 1. Do not place the UPS on the slope or scraggy land. (Figure 4) 2. Please place the UPS in the place where ...

4. Please keep away from fire source and high temperature to avoid over-high temperature. (Figure 8) 5. Do not lay goods on the UPS. (Figure 9) 6. Do not install UPS in the place where contains caustic gas. (Figure 10) 7. Running environment temperature: 0℃-40℃. 1 0 c m 1 0 c m ...