Kyocera KM-6030 Service Manual

Figure 1-3-31 13. Remove the tape. Remove the four blue screws locking each of the two separate retainers to the intermediate tray and detach both retainers. 14. Pull out the intermediate tray. Figure 1-3-32 15. Remove the tape. Figure 1-3-33 Link lever Screw Blue screws Blue screws Blue screws Blue screws Retainer Retainer Intermediate tray Tape Tape ...

fuser section is indi- cated during copying (jam in fuser section 2). Jam code 41 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off manually. Replace the exit switch if indication of the correspond- ing sensor on the touch panel is not displayed in reverse. (25) A paper jam in the fuser section is indi- cated during copying (jam in fuser section 3). Jam code 42 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off manually. Replace the exit switch if indication of the correspond- ing sens ...

paper feed section is indicated during copying (multiple sheets in paper feed section 1). Jam code 24 Broken feed switch 5 actua- tor. Check visually and replace feed switch 5 if its actuator is broken. Defective feed switch 5. Run maintenance item U031 and turn feed switch 5 on and off manually. Replace feed switch 5 if indication of the corresponding sensor on the touch panel is not displayed in reverse. Defective timing switch 3. Run maintenance item U031 and turn timing switch 3 on and off manually. Replace feed switch 5 if indication of the corresp ...