MA lighting 2-Port Node Manual Manual
Text of MA lighting 2-Port Node Manual Manual
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
22222
CONTENT
Introduction 3
Quick Start 5
Examples of use 6
Layout
Technical Service: [email protected]; +49.5251.688865-30 Emergency Line: +49.5251.688865-99 2-Port Node Version 1.1
33333
Introduction
The grandMA 2-Port Node is the latest member of the grandMA family that seamlessly fits into the network of the MA product range.
The 2-Port Node was designed in view of a decentralized DMX distribution f
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
44444
The following design models are available:
- Flush-mount version (Power over Ethernet) with 1,204 parameters, to be sunk-mounted in flush box according to EU standards
Cannot exclusively be operated with the „onPC“ software.
2-Port Node, flush-mounted box „EU version“, 2
Technical Service: [email protected]; +49.5251.688865-30 Emergency Line: +49.5251.688865-99 2-Port Node Version 1.1
55555
Quick Start:
These are the basic steps to start up the 2-Port Node:
O Mount the 2-Port Node (flush-mount version) in a flush box; install the rig-mounted version using the
fastening screws)
see page 19
O Power supp
MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn
66666
Example of use 1
DMX A -out / in (512 parameter)
DMX B -out / in (512 parameter)
Switch / hub
100 Mbit
Installation:
The network must be of a 100Mbit type.
Options:
Output: 2x512 parameters / 2 Universes max. (i.e.
all channels output must be patched in the two
Universes.)