Lightwave JSJSLW930 Instruction Manual

Responsible Authority: LightwaveRF PLC, Innovation Campus Birmingham Faraday Wharf Holt Street Birmingham B7 4BB Tel: +44 (0)121 250 3625 Email: [email protected] Model Number(s): JSJSLW930 Description: Lightwave Link Directives this equipment Complies with: 2006/95/EC The Low Voltage Directive N/A 2004/108/EEC The Electr ...

What do I need? A standard home WiFi router with a broadband connection, a WiFi enabled device such as a smartphone, and some LightwaveRF devices to control are all that is required. Power the Lightwave Link and connect it to your home WiFi router. The instructions in this booklet will explain how. The Lightwave Link will th ...

Indicator LED Main button Lightwave Link Installation IMPORTANT: Please retain these instructions for guidance on how to link other LightwaveRF devices. ...

The Lightwave Link requires a wireless router with a permanent internet connection in order to operate. You will also require a WiFi enabled smartphone, tablet or PC. 1. Take the ethernet connector cable (supplied) and connect it to any spare available LAN port on your wireless router. Connect the other end of the cable to t ...

The LED indicators are used to indicate the status of the Link and to indicate if there is a problem. If there is a problem reported, it will usually refer to an insecure cable connection or a server connection problem. If it has been set up correctly, the App will display details of any specific problem. See www.lightwaver ...

1. Download the LightwaveRF App from the App Store or Google Play. It should automatically install onto your device. 2. Select the App icon and enter the App. 3. Please follow the in-App instructions which will take you through the setup procedure. The dimmer setup section in this booklet will show you how to link the dimmers to t ...

Basic App features Rooms The LightwaveRF Apps organise your linked LightwaveRF lighting and power devices into rooms which you can name. These rooms could be, most commonly, the rooms of your house, such as ‘lounge’ or ‘kitchen’, but you can personalise them to represent what ever you like. Within these rooms you can set u ...

Choosing device type & Moods Once you have set up a room, you can begin to populate it with LightwaveRF devices. You need to define the device type as this allows the correct command buttons to be displayed when you control that device from the App. Dimmers, for example, should be set to ‘dimming’. Other options for other dev ...

Additional App features Events An Event is simply a list of LightwaveRF devices that you want to control at the same time. When you activate the Event, all the devices in the list will do whatever you have preset them to do. You could, for instance, set an Event called ‘cinema’ which, when activated, will drop the projector sc ...