3Com OfficeConnect 3CP4144 Cli User's Manual

Santa Clara, California 95052-8145 Copyright © 2000 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation. 3Com Corporat ...

Establishing Communications with the OfficeConnect Remote 812 1 Local Connection 1 IBM-PC Compatible Computers 1 Macintosh Computers 1 UNIX-Based Computers 2 Remote Connection 2 2 CLI COMMAND CONVENTIONS AND TERMINOLOGY Command Structure 1 Format 1 Parameters 1 Values 1 Names or Strings 2 Network Address Forma ...

2 Quick Setup Identification information 2 Quick Setup Management Information 2 TELNET information 3 Quick Setup IP information 3 Quick Setup IPX information 4 Quick Setup Bridge Information 5 Sample Identification Information 5 5 QUICK VC SETUP CLI Qu ...

6 show ip routing settings 6 Configuring an IP Network over the LAN 6 Configuring IP RIP on the LAN 6 Configuring IP for the Remote Site Connection 7 Configuring IP RIP for a Remote Site 8 Configuring Static and Framed IP Routes 8 IP Tools 9 Address Translation 9 Network Address Translation (NAT) 9 Configuring NAT 10 Monitoring NAT 11 DHCP 1 ...

24 Setting System Identification 24 Configuring Web Browser and TELNET Login Access 24 Providing TFTP Access 25 Setting Password Protection 25 Introduction 26 Filtering Overview 26 OfficeConnect Remote 812 Filtering Capabilities 27 Filter Classes 27 Filter Types 27 Data Filters 27 Advertisement Filters 28 Generic Filters 28 Creating Fil ...

37 Configuring a Filter for a VC/Remote Site Using CLI 37 Setting Filter Access Using CLI 38 Managing Filters Using CLI 38 Displaying the Managed Filter List Using CLI 38 Adding Filters to the Managed List Using CLI 38 Removing a Filter from an Interface Using CLI 39 Removing a Filter from a VC/Remote Site Profile ...

B-4 add ipx service [service_name] B-5 add ipx_route vc B-6 add ipx_service vc B-6 add nat tcp vc B-7 add nat udp vc B-7 add network service Status B-8 add snmp community B-9 add snmp trap_community B-9 add syslog loglevel [loglevel] ...

B-12 disable bridge spanning_tree B-12 disable icmp B-13 disable interface B-13 disable ip forwarding B-13 disable ip network B-13 disable ip rip B-13 disable ip routing B-13 disable ip static_remote_routes B-13 disable ipx network

B-15 enable security_option snmp user_access B-15 enable snmp authentication traps B-15 enable telnet escape B-16 enable user B-16 enable vc B-16 exit CLI B-16 HANGUP B-16 hangup interface B-16 hangup vc B-16 HELP B-16 help B-16 HISTORY B-16 history B ...