Linear HDMI-SW-2X2M Operation & User’s Manual

Technical Support: Telephone (800) 421-1587 (760) 438-7000 Fax (760) 438-7199 Technical Support Hours: 6:30 AM - 4:30 PM PST Monday through Friday. Email: [email protected] Website: www.linearcorp.com Notice Linear LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. © 2008 Linear LLC, All Rights Reserved ...

Introduction / Operation Notes Features Panel Descriptions Connecting and Operating the 2X2 Switcher For HDMI RMT-2 Installation IR Code Conflicts RS-232 Interface Wiring Diagram Specifications Warranty 1 2 3 4 5 6 7 8 9 10 ...

up to 1080p plus multichannel digital audio from either one of two sources to the two displays. Two outputs gives you the choice of sending high definition audio and video signals to two displays simultaneously. A digital audio output port is available if you need to direct the audio to an A/V receiver. The 2x2 Switcher for HDMI eliminates the need to disconnect and recon ...

• Outputs are mirrored to two HDMI/DVI* displays simultaneously • Supports resolutions up to 1080p, 2K and 1920 x 1200 • Additional digital optical audio output is extracted from the HDMI input for easy • connection to multichannel A/V receivers Inputs are switched • with either the provided IR remote control or RS-232 serial control interface Extends the range of HDMI compliant d ...

Input HDMI Input 2 RS-232 Serial Control Interface Digital Optical Output HDMI Output 2 IR Eye Extension Port HDMI Output 1* *See note on page 4 HDMI Input 1 ...

OPERATING THE 2X2 SWITCHER FOR HDMI 4 Connect the supplied cable from the HDTV HDMI source into the HDMI input 1. port 1 of the 2X2 Switcher for HDMI. Connect the second HDTV HDMI source to HDMI input port 2 on the 2X2 Switcher 2. for HDMI using a user supplied HDMI cable. Connect the display(s) to the HDMI output port(s)* of the 2X2 Switcher for 3. HDMI using user supplied cable(s). Optionally, connect an external audi ...

2. Verify that dip switches 1 & 2 are in the down (OFF) position. (See page 6) 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test the RMT2-IR remote by pressing ONLY one button at a time. The indicator light on the remote will flash once each time you press a button. WARNI ...

2X2 Switcher for HDMI Remote Channel 1: Default Remote Channel 4: Remote Remote Channel 1: Default 1 2 Remote Channel 2: 1 2 Remote Channel 3: 1 2 Remote Channel 4: 1 2 How to Resolve IR Code Conflicts In the event that IR commands from other remote controls conflict with the supplied RMT-2IR remote control, changing the remote channel will alleviate this issue. The RMT-2IR remote control and the 2X2 Switcher for HDM ...

Binary Table ASCII Input Binary 1 1 0011 0001 2 2 0011 0010 3 3 0011 0011 4 4 0011 0100 Terminal Settings Bits per second ................................................................................................. 19200 Data bits .................................................................................................................... 8 Parity ................................................................ ...

...

Input Video Signal ................................................................. 1.2 Volts p-p Input DDC Signal ............................................................ 5 Volts p-p (TTL) Single Link Range ...................................................... 1080p/1920 x 1200 HDMI Connector ................................................. ...

installation companies. Linear LLC warrants this product to be free from defects in material and workmanship. For the term of the warranty, see the list of products below. The Warranty Expiration Date is reflected by a date code that is affixed to all of Linear’s products. This warranty extends only to wholesale customers who buy direct from Linear or thro ...