3Com 3C16120 - SuperStack 3 Server Load Balancer Release Note

SuperStack® 3 Server Load Balancer Server Load Balancer Plus Release Notes 3C16120 3C16121 Software Version A3.5 Release Date June, 2001 ...

Santa Clara, California 95052-8145 Copyright © 2001, 3Com Technologies. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Technologies. 3Com Technolo ...

Overview 5 Product Prerequisites 5 Web Browser Requirements 6 Solaris and Linux Operating Systems 6 Reset To Factory Defaults 6 Configuration Issues 6 Changing Password 7 Committing Configurations 7 Resetting Unit Settings 7 Clock Settings 8 Redundant Configuration Issues 8 Virtual Router Redundancy Protocol Priority Generat ...

1 World Wide Web Site 1 3Com Knowledgebase Web Services 1 3Com FTP Site 2 Support from Your Network Supplier 2 Support from 3Com 2 Returning Products for Repair 4 ...

Overview These release notes cover the Server Load Balancer (3C16120) and the Server Load Balancer Plus (3C16121). Before using your Server Load Balancer and Server Load Balancer Plus, please read this document in its entirety. It contains important information about the product and the software. 3Com provides easy access to technica ...

Balancer Plus. If the JRE program is missing, you will be prompted to install it. See the Server Load Balancer and Server Load Balancer Plus User Guide for information. For an up to date list of supported operating systems and browser releases, refer to the 3Com Web site at http://www.3Com.com. Click Support for Products for more i ...

levels of access, admin and monitor. The password field contains blank default login passwords. The two levels of access are: I admin — the user can access and change all manageable parameters I monitor — the user can view all manageable parameters ...

Redundant Configuration When resetting Device A, the primary IP addresses (for both Device A & Device B), the subnet mask and the default router settings are preserved. The device redundancy setting is set to none and Device B synchronizes to this configuration setting. When Device B discovers that it is no longer part of a redunda ...

9 Table 1 depicts the contributing values used for the various network connectivity components monitored by the Server Load Balancer and Server Load Balancer Plus: In the example message log line shown under Virtual Router Redundancy Protocol Priority Generation on page 8, the priority value derived is defined as follows: Preve ...

In some cases, these identifiers could collide with either another Server Load Balancer and Server Load Balancer Plus or with other network devices that are taking part in the VRRP protocol. As a result, it may be necessary to override the VRIDs used by the Server Load Balancer and Server Load Balancer Plus. To override these valu ...