Lippert 104X-E4690 Technical Manual

Text of Lippert 104X-E4690 Technical Manual

Lippert 104X-E4690 Revision 1.0 / April 11

© LiPPERT Embedded Computers GmbH Hans-Thoma-Str. 11 D-68163 Mannheim www.lippertembedded.com 104X-E4690 PCI/104-Express Graphics Card Technical Manual

Technical Manual 104X-E4690

LiPPERT Document: TME-104X-E4690-1V0.doc, Revision 1.0 Copyright © 2010-2011 LiPPERT Embedded Computers GmbH, all rights reserved Trademarks Windows is a trademark of Microsoft Corporation. AMD, the AMD arrow logo, ATI, the ATI logo, Radeon, and combinations thereof are trademarks of Advanced Micro Devices, Inc. PCI/104-Express is a registered trademark of PC/104 Consortium. All other trademarks a

Table of Contents

1 Overview 1 1.1 Introduction ........................................................................................................................ 1 Features ....................................................................................................................................1 Block Diagram ................................................................................................

Lippert 104X-E4690 Fan Connector (X9)

........................................................................................................... 18 4 Using the Module 19 4.1 Drivers .............................................................................................................................. 19 Scalable Power Consumption ............................................................................................... 19

Advanced Configuration and Power Management Interface

AMD Advanced Micro Peripherals BIOS Basic Input Output System BPP Bits Per Pixel CPU Central Processing Unit CRT Cathode Ray Tube DAC Digital-to-Analog-Converter DC Direct Current DDR Double Date Rate DMA Direct Memory Access EMC Electromagnetic Compatibility HDA High Density Audio I²C Inter-Integrated Circuit LCD Liquid Crystal Display LED Light Emittin

The 104X-E4690 is a graphics card with an ATI Radeon™ E4690 graphics processor for embedded applications

with an excellent performance power ratio. The board adds unprecedented graphics performance to an embedded PC on a small 3.78" by 3.55" printed circuit board. Based on 55nm technology, the E4690 delivers more than double the performance per watt* than previous generation processors. Bui

512MB on chip

memory Display Port A Display Link A Display Link B DAC1 Link Display Link E/F Display Port B VGA 24 Bit LVDS (Dual Channel) PCIe x 16 PCI/104-Express

1.2 Ordering Information

104X-E4690 Models Order number Description 712-0007-10 104X-E4690 Operating temp. range: 0°C…+60°C 812-0007-10 104X-E4690 Operating temp. range: -20°C…+60°C Accessories There are some options available for the 104X-E4690. Please check their availability before ordering. Order number Description 765-0033-10 765-0034-10 765-0026-10 Heat spreader 104X-E4690 (already included on delivery) He

+5 V DC

Rise time < 10 ms Supply voltage tolerance ± 5% Inrush current t.b.d. Supply current +5 V DC / max. 5A +3.3V DC / max. 2A Environmental Specifications Operating: Temperature range 0 … 60 °C (standard version) -20 … 60 °C (industrial version) Temperature change 10K / 30 minutes maximum Humidity (relative) 10 … 90 % (non-condensing) Pressure 4

Dimensions (L x W)

90.2 mm x 95.9 mm Height max. 11mm on topside above PCB (without bus connectors) max. 5 mm on bottom side above PCB (without bus connectors) Weight approx 90 gr. without cooling solution approx 250 gr. with active heat sink Mounting 4 mounting holes as defined in the PCI/104-Express specification 4 mounting holes for cooling device Note: It is strongly recommend using plastic spacers in

2.2 Hardware setup

Caution Be sure to observe the EMC security measures. Make sure you are always at the same potential as the module. Caution Never connect or disconnect peripherals like PCI while the board's power supply is connected and switched on! Plug the 104X-E4690 module on top or under a PCI/104-Express or EPIC-Express single board computer (SBC). Connect the 104X-E4690 to a VGA or Display Port monitor. Connect

2.3 Cooling solutions

The following solutions are available for the 104X-E4690 as cooling device. Please ask our support department for detailed 3D drawings. Heat spreader part number 765-0033-10 The heat spreader is included as default on the board. Additional cooling is necessary for the operation of the board by mounting an adequate cooling device on the heat spreader. With such an additional cooling device the heat

Heat pipe adapter

part number 765-0034-10 The heat pipe adapter is optionally available to use an 8 mm heat pipe and an condenser with adequate heat sink on the other end of the heat pipe for cooling. With such an additional cooling device the heat pipe adapter is suitable for a temperature range up to 60°C ambient temperature. Please note that the 8 mm heat pipe is not included. Heat sink active part number 765-0026-

Lippert 104X-E4690 3 Module Description

3.1 Interfaces VGA (X6, X10) The analog display port provides a RGB signal output along with a HSYNC and VSYNC signal. There is an associated DDC signal pair that is implemented on the analog port. The intended target device is for a CRT based monitor with a VGA connector. Display devices such as LCD panels with analog inputs may work satisfactory but no functionality has been added to the signals

DisplayPort (DP) Connector (X1 (X12), X2 ( X13))

Two DisplayPort monitors can be used at the same time, each working with a maximum resolution of 2560 x 1600 pixels at 60Hz refresh rate. Connector type: Molex 47272-0021 Pin Signal Pin Signal 1 TD0+ 2 GND 3 TD0- 4 TD1+ 5 GND 6 TD1- 7 TD2+ 8 GND 9 TD2- 10 TD3+ 11 GND 12 TD3- 13 GND (CONFIG1) 14 GND (CONFIG2) 15 AUX+ 16 GND 17 AUX- 18 HPDET 19 GND (RETURN) 20 +3.3V Integr

Lippert Video Card Owners Instructions: