Luma MF24B Owner's Manual

And neither are we. Always at the forefront of our industry, our goal is to offer the best quality product and consumer value on the market. Our team is constantly pushing the boundaries of innovation and design to create exceptional products to help you achieve a more comfortable living or work ...

CONTENTS Important Safety Information .......................................................................... 4 Get To Know Your Misting Fan ........................................................................ 5 Product Benefits .......................................................................................... 5 ...

These instructions are not meant to cover every possible condition and situation that may occur. Please read all instructions before using this misting fan. Failure to carefully read all instructions may result in possible electric shock or fire hazard, and will void the manufacturer’s warranty. 1. Use thi ...

GET TO KNOW YOUR MISTING FAN PRODUCT BENEFITS  Designed for cooling large areas such as patios, factories, manufacturing facilities, garages, athletic fields, greenhouses and more  Centrifugal misting system means there’s no clogged nozzles and no need to use filtered water  Constructed of heavy-gauge, anticorrosive ...

during the assembly process. DO NOT plug in the fan before assembly. This misting fan comes in two separate boxes. Carefully remove all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any of the ...

STEP 2: CONNECTING THE BACK PANEL 1. Refer to diagram 2. Find the rectangular panel located on the back of the stand pole. Remove this back panel from the stand pole by completely unscrewing it from the stand pole. Set it aside. 2. Locate the water pump. This is packaged separately from the stand pole and can be found in box #1 ...

1. Refer to diagram 3. Locate the metal pipe and fan head and attach the fan head onto the pipe. The fan head should have 2 water hoses (1 large and 1 small) and 1 electric wire with male connector plug connected to it. 2. Take the electric wire with the male connector that is located on the back of the ...

STEP 4: CONNECTING THE FAN HEAD TO THE STAND POLE 1. Refer to diagram 4. Place the stand pole/base on a level surface. 2. Take the water hoses and electric wire from the fan head/pipe and thread them through the top of the stand pole. Do not attach the fan head to the stand pole yet. 3. Connect the male and female connector plu ...

1. Refer to diagram 5. Take the water pump and place it in the pump slot. 2. Locate the water tank and place it on the fan base, making sure to line up the pump opening with the pump slot so that they fit together. Place any protruding hoses or wires into the tank. 3. Put the tank cover over the tank. ...