NEC DS1000 Quick Setup Manual

http://ws1.necii.com/ds2000 . 1. Start-up Programming 3. Additional Resources • To use the IntraMail enhancements provided by software versions 03.2*.** and higher, you must use the NEC IntraMail Utility version 1.2 to upgrade your Intra- Mail CompactFlash card. If you don’t upgrad ...

personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreciated. Forward your remarks to: NEC Unified Solutions, Inc. 4 Forest Parkwa ...

DS1000/2000 Quick Setup Guide Table of Contents ◆ i Table of Contents Section 1: Start-up Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Default Feature Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Trunks . . . . . . . ...

ii ◆ Table of Contents DS1000/2000 Quick Setup Guide Storing Trunk Routing in a Speed Dial Bin. . . . . . . . . . . . . . . . . . . . . . 2-28 Centrex Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28 Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

DS1000/2000 Quick Setup Guide Section 1: Start-up Programming ◆ 1-1 1 Section 1: Start-up Programming Section 1: Start-up Programming Default Feature Setup This is how your system operates on initial power-up: Trunks In DS1000, trunks 1-6 (if installed) ring line keys 1-6 and single line telephones. ● Trunks 4-6 will only ...

1-2 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide Frequently Asked Programming Questions If you have this question: Go here: General How do I enter the Programming Mode and change the system’s options? Programming the System on page 1-5. I want to default the system. What are the steps? Reloading the Sys ...

DS1000/2000 Quick Setup Guide Section 1: Start-up Programming ◆ 1-3 1 Expanded Database The Expanded Database is a new database method that provides database records (memory) for all possible extensions, trunks, Hunt Groups, Ring Groups, and Voice Mail ports. This new capability allows for: ● Automatic Slot Configuration ...

1-4 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide Default Numbering in DS1000 Default Numbering in DS2000 Default Numbering in DS1000 Stations (Telephones) Ports Station Numbers Extension Numbers Digital Station 1-16 1-16 300-315 Analog Station 1-8 17-24 316-323 Door Box 1, 2 25-26 324, 325 Unassigned 1 - 2 ...

DS1000/2000 Quick Setup Guide Section 1: Start-up Programming ◆ 1-5 1 Automatic Slot Configuration (DS2000) DS2000 Automatic Slot Configuration automatically sets up station and trunk PCBs when you initially power up the system. This simplifies installation because you no longer have to use system programming to activate ...

1-6 ◆ Section 1: Start-up Programming DS1000/2000 Quick Setup Guide How to Exit the Programming Mode To exit the programming mode: 1. When you see: Press and release the hookswitch, or press SPK. If you don’t see one of the above prompts, press CONF until you do. When you exit program- ming, the system automatically stores ...