Ness HD-960H Operation & User’s Manual

Notice to Users: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction ...

 This product uses a Lithium battery.  To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.  Dispose of used batteries according to the manufacturer’s instructions.  This equipment and all communication wirings are intended for indoor use only.  To ...

13. Damage Requiring Service  Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: ① When the power-supply cord or the plug has been damaged. ② If liquid is spilled or objects have fallen into the equipment. ③ If the equipment has been exposed to rain or ...

DVR Set 4 / 8CH 8 / 16CH Manual / CMS CD Remote Controller Quick Guide Screws HDD Brackets Rack Bracket (Except A and E Type) Data Cable Power Cable Adapter ...

 STEP 1. Date / Time Configuration (‘before’ HDD(s) installation)  Plug a network cable, if any.  Turn on the DVR and press ‘OK’ on no HDD(s) detection message.  Go to SETUP>SYSTEM>General>Setup.  Check on ‘NTP Setup’ box, and then select your ‘Time Zone’.  Select DST (Daylight Saving Time) ‘On’ or ‘Off’ accordingly.  When the DVR has no internet connection, adjust Date ...

1.  PRODUCT FEATURES ................................ 10 1.1  Unpacking ...................................................... 10 1.2  Service ........................................................... 10 1.3  System Connection Diagram ........................ 10 1.4  Specification .................................................. 15 2.  INSTALLATION ............................................ 16 2.1  Hard disk and DVD-RW Inst ...

6.5.1  Server List ........................................... 83 6.5.2  Remote Device System Log ............... 84 6.5.3  Remote Device Event Log .................. 84 6.5.4  CMS System Log ................................ 85 6.5.5  Health Check ....................................... 85 6.5.6  Show All Windows .............................. 87 6.6  Application ...... ...

11.2 Connection Method .................................... 145 11.3 Connection Diagram ................................... 145 11.4 Relay ............................................................ 147 11.4.1 Relay Setup (Optional) ..................... 147 11.4.2 Schedule Setup (Mandatory) ........... 148 11.5 Setup (Mandatory) ...................................... 148 11.5.1 Text O ...

1.1 Unpacking  This equipment is an electronic appliance, so it should be handled with special care.  After unpacking, please check if all the following items are included. - DVR Main body - A and E Type : Power Supply Adapter (DC 12V, 5A) and Power Supply Cable - C and F Type : Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable - J Type : Power Supply Adapter (DC 12V, 6A) and Power Supply Cable - Remote Control With 2 AA ...

Video Input 4 / 8 (BNC) 16 (BNC) Video Output Composite : 1 VGA 1 port (Max. 1920 x 1080) HDMI 1 port (Max. 1920 x 1080) Spot Out Composite : 1 (Multi Spot) Loop Out N/A 16 (BNC) Recording rate (Max) 120 (100) / 240 (200)@960 480 (400)@960 Audio Input / Output 1 Input / 1 Output 16 Input / 1 Output Alarm Input 2 Input 16 Input Master Alarm N/A 1 Port Alarm Output 1 (Relay) 16 (TTL) / 2 ...

2.1.1 SATA Port  When installing HDDs, make sure to connect from SATA 1 Port.  A Type - Main board of this DVR has three SATA port: it is indicated as SATA 1 and 2.  E Type - Main board of this DVR has one SATA port: it is indicated as SATA 1.  C, F and J Type - Main board of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5. - Please mount DVD-RW at the SATA ...

 C, F and J Type DVRs have 5 internal SATA Ports.  1-4 SATA Port: It is designed to mount HDD. Connect from SATA 1 port when installing HDDs.  5 SATA Port: Please mount a DVD-RW.  Only one DVD-RW can be installed among the SATA Ports. 2.1.3 e-SATA External Storage  C, F and J Type DVRs have one external SATA Port; the picture above shows external SATA 6 Port.  6 SATA Port: It is designed to mount up to 4HDDs pe ...

2.2.1 Video-In/Loop Out Connections A and C Type  Connect Analog camera to ‘VIDEO IN’.  If a user wishes to link a camera input to another device, use ‘LOOP OUT’. (C Type).  Assure the ‘VIDEO IN’ (top connector) and ‘LOOP OUT’ (bottom one) connections are connected properly, not opposite way. E and F Type  Connect HD-SDI cameras to ‘HD-SDI IN’ from channel 1 to 16. J Type (True Hybrid)  Connect HD- ...

 Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device.  Please Click ( ) SETUP> DEVICE > DISPLAY > General and the following screen will display.  Click the box below to select resolution. - A user can select the resolution among ‘1920x1080 (60Hz)’, ‘1920x1080 (50Hz)’, ‘1280x720 (60Hz)’, ‘1280x720 (50Hz)’ and ‘1024x768’. - If the resolution is changed then the DVR may re ...

 Connect Alarm Output (buzzer, siren, etc.) to ‘NO and/or NC’ connectors, Power to ‘COM’ connector and Ground to ‘GND’ connector. 2.2.10 RS-485/422 Connections  PTZ Camera and Keyboard controller connector.  Please use TX+, TX-, RX+ and RX- terminals accordingly. 2.2.11 RS-485 Over Coax Connections  PTZ Camera Connector  Please connect Coax to ‘Video In’ and select any Protocol in Camera/PTZ ...