Next 835509 Assembly Instructions
Text of Next 835509 Assembly Instructions
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging as p
• Made from MDF, Acrylic and metal.
• Made in China
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if neces
1. Use a spirit level to check that marks are level.
2. Lightly mark on the wall the position where to drill
for the fixings.
1. Offer the suite to the wall in the position that you
intend to attach it.
STEP ONE
NOTE:
Two "L" shaped brackets are located either side of
your suite as shown. These are used to attach the
suite to the wall.
2. Drill four holes and insert an appropriate wall plug
into each.
PARTS
STEP TWO
3. Secure 2 x wall brackets (A) to the w
1. Put the pebbles (2) evenly to cover the pebble bed.
Please use the frosted pebbles towards the backto
allow the light to stream through.
• Heating Appliance Settings
1. The fire is ready for use through controlling the
switches located underneath the canopy.
NOTE:
The switches will look like the diagram as shown. It is
important to be aware that the switches must be
turned on in the correct sequence as below:
• ‘A’ must be
European Fires (CE approved)
EARTH: GREEN and YELLOW
NEUTRAL: BLUE
LIVE: BROWN
NOTE:
When in use, the fan will emit a faintly audible ‘hum’. This is a normal feature of fan assisted air movement. To reduce
dust build up, the fan area must be regularly vacuum cleaned through the grill, with a soft brush nozzle, when the fire
has been switched off and is cool.
The fan heater has a thermostatic cut-o