AOLYNK DR814Q Quick Start Manual

Quick Start 1 Packing List Unpack the shipping carton carefully and check the following items listed below: z One Aolynk DR814Q ADSL2+ Broadband Router z One power adapter z One telephone cable z One Ethernet cable z One USB cable z Two sets of screws and anchors z Aolynk DR814Q ADSL2+ Broadband Router Quick Start z CD ...

II. Connect to a PC or the Ethernet The Ethernet ports available with the DR814Q support auto-MDI/MDIX, so you can use crossover or straight-through cables to connect a PC, hub, or switch to those ports (LAN 1 through LAN 4). III. Connect to the power adapte ...

(1) Configure the PC to obtain an IP address and DNS server address(es) automatically. (2) Check the proxy server. If the PC uses the proxy server to access the Internet, you must disable the proxy service. (3) Run the Web browser and enter http://192.168.1.1 (default IP address of the LAN port of the DR814Q) in the address bar of the b ...

Click [Quick Setup] in the navigation bar to enter the corresponding page. z To access a network by PPPoE dial-up connection: Select the PPPoE option, type in the VPI/VCI value, the username and password required for the dial-up connection which are provided by your ISP, and then click . Figure 3 Quick Start – PPPoE Login To acces ...

password required for the configuration. II. Display IP address of the WAN port on the DR814Q After a while, click [Status] in the navigation bar to enter the [Status] page. A new public IP address for the WAN IP Address item has replaced the previous 0.0.0.0, indicating that the DR ...

Table 2 Quick troubleshooting Symptom Solution The Power LED is OFF. Make sure: z The power adapter that comes with the DR814Q is used. z The power connection is correct. The LAN LED is OFF. Make sure that: z The Power LED is ON. z The Ethernet cable is connected to the port correctly. z The used Ethernet cable is in good condition: ...