NUUO NVRmini 2 Operation & User’s Manual
Read Online
Read the NUUO NVRmini 2 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
1. Installation ................................................................................................. 8 1.1 Installation Process .............................................................................. 8 1.2 LED Status Definitions ...................................................................... 16 2. Settings ..................................................................................................... 17 ...
2.5.5 CMS Service Setup .............................................................. 56 2.6 Management ......................................................................................... 56 2.6.1 View the List of Users ......................................................... 56 2.6.2 Create New Users ............................................................. ...
3.3.1 Add New Tag Filter ............................................................... 82 3.3.2 Edit Tag Filter ......................................................................... 85 3.3.3 Delete Tag Filter .................................................................... 85 3.3.4 Import/Export Tag Filter ......................... ...
5.1.1 Live View Control Panel ................................................... 103 5.1.2 Live View Setting ................................................................ 106 5.1.3 General Setting ................................................................... 106 5.1.4 Stream Profile Setting ................................................... ...
7.1.5 Recorded Video Enhancement....................................... 133 7.1.6 Save a Video ........................................................................ 134 7.1.7 Save an Image .................................................................... 135 7.1.8 Print an Image ..................................................................... 136 7.1.9 ...
12.6 Install ActiveX ............................................................................... 159 12.7 Cannot Log in to the Unit with Internet Explorer ........... 160 Appendix – RAID System ................................................................................. 161 Introduction to RAID ................................................................. ...
This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see the GNU General Public License (GPL) for the exact terms and conditions of this license at www.gnu.org. The GPL source code incorporated into the product is available for free download at our web site http://www.nuuo.com/. Subject to GPL, you may re-use, re-distribute and modify the GPL source code. Note ...
Step 1: Unpack the Unit This package contains the following items: The unit Quick Start Guide Screws for disk drives Key Power cord Warranty card 19V DC power transformer CD with Install Wizard, Backup, Live View, Playback, Verification Tool and Offline Tool application, user manual, and quick start guide The electronic components within the unit can be damaged by Electrostatic Disc ...
Step 2: Install Hard Drives Refer to compatibility list and install HDDs. For optimal performance consideration, install disks with the same model and storage capacity. The available RAID level depends on the amount of disks installed. 1. Open the lid on the front of the unit enclosure. 2. Pull a HDD tray from the enclosure. See the front view figure. 3. Carefully lock the disks into the HDD tray with screws. 4 screws for each ...
view figure. 3. On the front of the unit, press the power button. See the front view figure. It takes about a minute for the unit to fully power up. Once it is powered up: The System Status LED turns blue. See the front view figure. The buzzer beeps one time. Step 5: Install the Software 1. Insert the CD into your CDROM. 2. Double-click Setup.exe to begin installation. ...
Date/Time and RAID level. Advanced Mode: configure all settings manually: network, license, camera, Date/Time, upgrade notification, and RAID level “Add license” function is supported in v1.0.0.20 and later version. 4. The Installation Wizard program starts searching for all the units on the internet currently. Choose one of them, and then click the button. 5. Type in the passwor ...
server: apply all settings which are automatically generated by the DHCP server, such as IP, subnet mask, gateway, and DNS. Configure network settings manually: configure the preferred settings one by one. 7. Activate camera license to have more channel capacity, and click the button. 8. Add cameras for this server. There are two ways of adding cameras, ...
Click the button after completing camera list. ...
if needed. Once daylight saving function is enabled, the time change will activate automatically every year based on the recurrence you set. Click the button. 10. Check “Enable Upgrade Notification” box if you want to receive notification when there is a newer FW version. Click the button. ...
create. Click the button. For 2 bay unit, only RAID 0 and 1 are available. 12. Review your settings. If the settings are correct, click the Finish button to exit the settings procedure and activate the system. ...
stability of the unit, never pull any disks out when the system is running. 1.2 LED Status Definitions Function LED Status Power Status Power-on: blue Power-off: dark System Status Healthy: blue Reset admin password: blue with blinking Unhealthy or abnormal temperature status or RAID volume status abnormal: orange Reset to default setting ...
the browser (Internet Explorer 8 and later). When connecting, choose your language, enter the username and password, and then begin using this system. There are five main functions of this unit: settings, live view, playback, help, and logout. They will be shown on the top of the page. Current firmware version and free storage capacity are shown above the function ...
5. The system will list all the currently available cameras. The inserted cameras are shown in blue. Click the icon to add a camera into your camera list. 6. After clicking the icon, the camera setting page will pop up. Click the item to which you want to add a camera. 7. Insert the camera name, username, and password. To have better compatibility between camera and system, please make sure the privilege of camera credentia ...
the Camera Setting tab. 2.1.2 Add Cameras Manually 1. Open Internet Explorer and log in to the unit. 2. Click IP Camera / Camera Settings. 3. Click the Camera Settings tab, and the camera list will be displayed on the bottom of the page. 4. Click on the camera list for the channel you want to add and enter the camera’s information. Camera name: The name of the camera. � ...
