Tascam dr-44wl Reference Manual

Contents 1 – Introduction........................................................................ 4 Features......................................................................................................4 Conventions used in this manual......................................................4 About SD cards............................ ...

Contents Track bounce (MTR mode only)...................................................... 44 Bouncing tracks.............................................................................. 44 Confirming the results of bouncing........................................ 44 Mixing down............................................................. ...

1 – Introduction Features • Compact audio recorder that uses SD/SDHC/SDXC cards as recording media • Built-in with high performance directional stereo microphones in XY positions • Mid-side decoding function can be used with MS microphones • Simultaneous recording of up to four channels is possible • Built-in four-track MTR ...

1 – Introduction About SD cards This unit uses SD cards for recording and playback. You can use 64 MB to 2 GB SD cards, 4 GB to 32 GB SDHC cards, and 48 GB to 128 GB SDXC cards with this unit. A list of SD cards that have been confirmed for use with this unit can be found on the TEAC Global Site (http://teac-global.com) or contact the TAS ...

2 – Names and functions of parts Top panel 1 Built-in stereo microphone (INT R/INT L) This is an XY directional stereo electret condenser micro­ phone. On this unit, the mic that appears behind and on the left in the illustration is called INT R and the mic in front on the right is called INT L. 2 PEAK indicator Lights (red) when the i ...

2 – Names and functions of parts press the / button to move forward to the next mark. (See “Moving to the cue mark position” on page 28.) When the PLAY FUNCTION screen is open, use this button to set the IN (start) and OUT (end) points of the interval that you want to set for loop playback. When the IN (start) and OUT (end) points are ...

2 – Names and functions of parts g INPUT LEVEL button Press this button to show the INPUT LEVEL setting screen on the display as a pull-down menu. When the INPUT LEVEL setting screen is shown, press this button to close the pull-down menu. h INPUT LEVEL volume When the INPUT LEVEL setting screen is shown, use this to adjust the input lev ...

2 – Names and functions of parts Icon On/off status Blank Key control function off Key control function on Key control function on (setting disabled state) 3 Reverb on/off status display This icon shows the reverb on/off status. Icon On/off status Blank Reverb is off Reverb is on (sound effects recording) INT MIC, EXT IN Reverb is on (SE ...

2 – Names and functions of parts Recording screen in the MTR mode 1 Display of the dual recording function on/off status (4CH mode only) Blank: dual recording function off : dual recording function on 2 Reverb on/off status display This icon shows the reverb on/off status. Icon Detail Blank Reverb is off Reverb is on (sound effects re ...