Steepletone SMC1033 Instruction Manual

File Specifications

Brand: Steepletone
Category: Media Converter
Model: SMC1033 (Instruction Manual), prpe7PoDw8JKg
File Type: PDF
File Size: —
Pages: 14 pages

Download PDF

Download Steepletone SMC1033 Manual (14 pages)

Read Online:

Read the Steepletone SMC1033 Instruction Manual online using the built-in PDF viewer.

Key Pages of Document

WITH TWIN CD PLAYER & RECORDER,

MP3 TO USB/SD ENCODING, 3-SPEED TURNTABLE, RADIO, CASSETTE AND AUX-IN PLAYBACK INSTRUCTION MANUAL PLEASE READ BEFORE USE ...

LOCATION OF CONTROLS

1. Dust Cover 2. LCD Display 3. Remote Sensor 4. FM Stereo LED Indicator 5. Power LED Indicator 6. BAND Selector 7. Off/Source/Tuner Selector 8. CD I /USB/SD button 9. CD I – Open/Close Button 10. CD I – CD Play/Pause/Stop / Button 11. USB Socket 12. CD I – CD Skip Up / Down Button 13. SD Card Slot 14. CD I – Folder up Button 1 ...

Connect the speaker wires to the speaker terminals (R + L) (42) located on the rear of the unit. Push the red right hand

side socket switch upwards to expose the hole in which to insert the red speaker cable – insert the wire and release the switch. Push down the right hand side black socket switch and insert the black cable wire. Repeat th ...

ID3 (track/album title) function (by remote handset)

Press the “ Info/Delete “ button during playback of MP3 file, the song title is being displayed. Press the “ Info/Delete ” button again to disable the function. Song title/folder name search function (by remote handset) You can search the track by the title/folder name in disc during stop mode:- E- ...

Set in CD I mode & stop the playback.

2. Press the “Program” button, “ PROG “ will appear on USB/SD operation display area (2). Moreover, it will indicate program no. and digits for track no. to be programmed. 3. Select a desired track by pressing USB/SD skip or buttons. E-3 4. Press the “ Program ” button to store the t ...

(1) repeat all track

(2) repeat 1 (3) off mode E-4 Indicator on CD/CD Recorder Play mode operation display area Repeat all Repeat 1 Off mode -------------- Random play mode (by remote control) Press the Random button at remote control will active the shuffle play function and the random indicator “ RAN “ will show on CD Recorder operation display ar ...

2. Press “CDII Rec

“ button (33) and then the “ CD Play/Pause ” button (26) until the play indicator “ “ show on CD Recorder operation display area (2). 3. After few seconds, the CD Recorder operation display area (2) will show the time counter and now the system is start recording process. Now push the cassette tape to the cassette compart ...

Although finalized CD-R disc may be played on ordinary CD players, remember that finalized CD-RW disc may not play

on ordinary CD players. - Owing to the variance of the compatibility of CD-R or CD-RW disc from the market. Please change to other one if you find the recording performance of existing one is not up to satisfaction. This is not the malfunction ...

This is recommended to take out the cassette tape from the system every times after listening and don’t leave the

cassette tape inside the system when not under playback mode. E-7 Phono operation - Remove the stylus protector. - Be sure that the tone arm is being detached from the tone arm rest before operating and re-secured again afterwards. 1. Select ...

After step 2, press “CD I Skip down” button (12) again will go to the previous track and remain the play or pause mode.

4. If press and hold the “CD I Skip up/down button “ (12) during playback, the playing track will go fast forward or backward until the button being released. 5. Press “CD I folder up “ button (14) to select your desire folde ...

⚠️ Download Safety

The Media Converter Instruction manual (14 pages) is completely safe to download (last scan date: 21/03/2026).

Related Devices for Steepletone SMC1033: