MTS Systems ROCKSTAR M151 Getting Started

To insert your CDMA UIM card: 1. Switch off the mobile phone and remove the rear cover and battery as shown below: 2. Insert the CDMA UIM card correctly in the card slot, as shown in the following image. ...

Note: Please keep the UIM (SIM) card out of the reach of children. The card and the contacts are vulnerable to damage due to scratching or bending. Therefore, be careful when using, inserting, or removing the card. Insert Memory Card To insert memory card: 1. Switch ...

Note: Use only compatible memory cards with this device. Incompatible memory cards may damage the card or the device and corrupt the data stored in the card. Turning Your Phone On/ Off Long press the End/Power key to switch on and off your phone. Charging the Battery Before using the ...

damage your device. Using Your Phone Lock/Unlock the phone From the home screen press Left key and then immediately press * to lock/unlock the phone. ...

 Dial a number and press the call key to make a call.  You can also call a number from the phonebook or call log in the same way.  To change the in call volume, press the navigation key up Answer/Reject a call To answer a call, press the call key. To reject a call, press End/Power key Make an International call From the ...

pad. Use Multimedia Features Menu > Multimedia You can use Music Player, FM Radio, and Sound Recorder. FM Radio Menu > FM Radio You can listen to your favorite FM channels using the inbuilt FM receiver of your phone. You need t ...

 Adjust Volume: Press * and # keys. Sound Recorder Menu > Multimedia > Sound Recorder Record any sound from the sound recorder with ease. You can play your previously recorded sound from the Record list option and record a new sound from the New record option. My MTS Planet My MTS Pla ...

Roar is a safety application. When you are in trouble, it alerts your family and friends through text message and phone calls. All you have to do is long press the number 2 key on the keypad. Use it and feel safer in your city.  Menu > Roar Application  Click on Roar status  Click on enable  Go to Roar call ...