Roxy RX-1100 Owner's Manual

Text of the manual

The information contained in this manual is subject to change without notice.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind. POWER AMPLIFIERS ROXY ROXY ROXY RX-500/RX-900/RX-1100 RX-500 RX-900 RX-1100

Service Information Form

Owner's Name: Shipping address: Street: City: Zip Code: Country: Phone Number: Fax Number: Email: MODEL: SERIAL: NUMBER: Place of Purchase: Name of Dealer: Full Address: DATE OF PURCHASE: Nature of the problem (Be sure to describe the

For a period of one (1) year from the date of delivery to the original purchaser (as shown on the original

invoice or sales receipt), The company warrants to the ORIGINAL OWNER of each new product (provided it was purchased at an Authorized The company Dealer) that it is free of defects in materials and workmanship and

The information furnished in this manual does not include all of the details of

design and engineering of this particular product; not does it cover every possible application or situation concerning its usage, which may occur during the installation, operation or maintenance of said the company product. IMPORTANT THE PRODUCT REQUIRES CLASS 2 OUTPUT WIRING.

In an effort to provide you with as much information as possible about

the high power-producing capabilities of your amplifier, we have created the following power matrices: 4- ohm mode 8- ohm mode 8-ohm bridging mode 4-ohm bridging mode 20Hz-20kHz+3/-0dB >95dB +/0.1degrees from 10Hz to 20kHz at 1 watt 483x364x89(mm) Dimensions(mm) Main power supply N.W W.G

Stereo/Mono:A three-position back panel switch is used to select Stereo, Bridge-Mono or

Parallel-Mono mode. Input/Output Data Input Connector: Balanced XLR connector. Input Impedance: Nominally 20k ohms, balanced; 10 k ohms, unbalanced. Output Connector: Two sets of color-coded 5-way binding posts (for banana plugs, spade lugs or bare wire) and two sets of

Balanced XLR inputs with balanced direct XLR output. Optional barrier block input connectors

are available with the PM-BB accessories. Efficient heat sinks and self-contained forced air cooling system, dissipate heat quickly and evenly for extra amplifier protection and greater power output. One year "no-fault" full warranty and guarantee

1. Turn down the level controls (fully counterclockwise) and turn off the amplifier.

2. Set the back panel Stereo/Mono switch to Stereo. 3. Connect the input and output cables . 4. Turn on the amplifier and adjust the level for each channel using the front panel level controls. 2.2 Mono Your amplifier's Mono modes provide double the power of th

Other Amplifier Manuals