QUAD 99 CD Instruction Manual
Text of QUAD 99 CD Instruction Manual
99 Stereo Power Amplifier and
99 Mono Power Amplifier
Instruction Manual
CONTENTS
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PACKING LIST AND UNPACKING THE EQUIPMENT . . . . . . . . . . 3
GUARANTEE AND PRODUCT REGISTRATION . . . . . . . . . . . . . . . 3
SERVICE ARRANGEMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . .
European Union Directives
Quad equipment is designed to comply with the legal provisions of EU
Directives 89/336/EC and 72/23/EEC. The standards which have been
applied were those in force at the time of the introduction of the product.
The product bears the CE mark:
Compliance cannot guarantee perfect performance. In the very rare
circumstance that you experience problems you should first try to locate and
remedy the origin of any distur
The Quad 99 power amplifier has an advanced specification. As this unit is
capable of generating extremely high power outputs it is particularly
important that you read the following instructions with particular care.
Although this amplifier has primarily been designed for use with Quad 99
Series components, it may be connected to any preamplifier with an output
level of .775V (0dBu) or higher.
PACKING LIST AND UNPACKING THE EQUIPMENT
The pa
the distributor for the country in which it was purchased or Quad
Electroacoustics Ltd.
Equipment returned for service should use the original packing. You should
enclose a brief note with your name and address and the reason for returning
the equipment.
ACCESSORIES
The following optional accessories are available.
Accessory description
Part No.
IEC mains cable 2m, fitted with UK plug
QUKES2B
IEC mains cable 2m, fitted with European plug
QE2P2S2
QuadLink
Mains working voltage and fuse ratings
The rated voltage for this unit is marked on the rear panel. Please check
with the dealer if you intend to use the equipment in regions which use
different values of mains voltage.
Quad manufactures equipment to the following principal mains voltage
requirements:
• Europe, including the UK, uses 230VAC
• Japan uses 100VAC
• USA, for example, uses 117VAC
• Korea, for example, uses 220VAC
If you are in any dou
INSTALLING THE QUAD 99 STEREO POWER AMPLIFIER
Before connecting the QUAD amplifier to the AC mains supply check that
the voltage marked on the back matches the voltage of your supply.
Mains On/Off Switch
The Mains On/Off switch is on the rear panel. When the amplifier is
connected to a Quad 99 system with the special AMPBUS cable this switch
should normally be left switched on as the amplifier will be remotely
switched.
Where the amplifier is not part of
The Quad AMPBUS system carries channels for normal stereo signals as
well as the centre, subwoofer and rear channels required for AV
applications.
The rotary switch on the back of the amplifier should be used to select the
appropriate channel. These channels are:
CH1
Stereo Left
CH2 Stereo Right
CH3
Rear Left
CH4 Rear Right
CH5
Centre
CH6 Subwoofer
The INPUT setting selects the RCA phono input. This setting should be
used only when the amp