Opticum HD 9600 Operation & User’s Manual

2. Environment protection ................................................................................................................ 3 3. Operating notes .............................................. ...

CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamat ...

such additions may result in the risk of fire, electric shock, or other personal injury. Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating. Do not block these openings or allow them to be ...

Attention! Your product Is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. Information on Disposal for Users (private households) in the European Union Used electrical a ...

NOTE! 3.1. Automatic Power Down In accordance with actual European Union requirements, Your receiver is equipped with function "Automatic Power Off". It works by switching the receiver into standby mode after a period of 3 hours after the last active use. In practice this means that if during this time the receive ...

To install the batteries in the remote control, remove the flap protecting the battery compartment (see Fig.: A – slider type - push and slide, B – latch type - lever the latch and pull the fold). If inside the chamber there are used batteries, they must be removed. Then put new batteries inside. When ...

• Common Interface Slot (optionally 2) • Card Reader (optionally 2) • High Definition Video output: HDMI and YPbPr (optionally) • Front panel display – VFD or LED • Channel sorting by Satellite, Alphabetic order & Network FTA, CAS • EPG: Now, Next events and 7 days sche ...

BUTTON FUNCTION POWER Switch receiver between Operation and Standby mode. HELP (Optional function) TV format Switch the TV Standard of the Screen. If you have problem with video format setting, switch this button until set the best video resolution Numeric buttons 0-9 Select the TV or Radio services and menu option ...

A: B: 1.Power button: Switch receiver between standby and working mode. 2.MENU button: Display menu on screen or return to previous menu. 3.OK button: Display channel list on screen, select item in menu. 4.VOL-/VOL + buttons: Decrease / increase sound volume. 5.CH-/CH+ buttons: Switch to previous / next channel. 6.Rem ...