rainforest EMU Operation & User’s Manual
Text of the manual
Copyright © 2012 by RAINFOREST AUTOMATION, INC (“RFA”). All rights reserved.
No part of this manual may be reproduced or transmitted in any from without the expressed,
written permission of RFA.
Under copyright law, this manual or the software described within, cannot be copied, in whole or
part, without
EMU™ – Energy Monitoring Unit
RFA-Z105
Version 2.23
User Manual
Table of Contents
Regulatory information ............................................................................................. 4
Quick Setup .............................................................................................
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
FCC/IC RF Exposure Statement
This equipment complies with FCC and Industry Canada radiation exposure limits set forth for
an uncontrolled environme
Step 1: Check Contents of the box
The box should contain the following items:
a) 1 x EMU™ Display unit
b) 4 x AA Batteries
Step 2: Register your EMU™
In order for your EMU™ to connect to the smart meter, you will need to register
your EMU™ with your utility. Please follow the procedure pr
Step 4: Wait for your EMU™ to join the smart meter
Your EMU™ will attempt to connect to the smart meter. You will see these two
screens:
You may see these two screens a few times. This could take 1-2 minutes.
When your EMU™ finds the smart meter and successfully communicates with it,
you will see this
Step 5: Configure your device
a. Press both of the buttons on your EMU™ simultaneously and release.
b. Press the Bottom Button.
c. Select the language you would like your EMU™ to use.
d. If your meter does not provide pricing (ask your utility), you will need to set
your energy price.
The digit to be modi
e. After you have entered all 5 digits of the energy price, you will see the battery
screen:
Press any button to return to regular monitor mode.
Battery