Panasonic ES-LA83 Operating Instructions Manual
Text of the manual
Before operating this unit, please read these instructions completely and save them for future use.
Operating Instructions
Rechargeable Shaver
Model No. ES-LA83
(6/$B$86LQGE
IM-B094-01
This WET/DRY shaver can be used for wet shaving with shaving
lather or for dry shaving. You can use this watertight shaver in
the shower and clean it in water. The following is the symbol of
Wet shaver. The symbol means that the hand-held part may be
used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks
Power source: See the name plate on the product.
(Automatic voltage conversion)
Motor voltage: 3.6 V DC
Charging time: 1 hour
This product is intended for household use only.
Parts identification
a
c
e
b
d
f
g
Protective cap
Outer foil section
Foil frame
System outer foil
System outer foil
while until it glows.
Depending on the environment, the shaver may not dry even if
you select a course that includes the “Dry” function. In this case,
wipe off any drops of water with a dry cloth.
Charging with the self-cleaning
recharger
Charge
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
1
2
About the LCD panel
The LCD panel shows the remaining battery capacity from 0% to
100%, in 10% increments.
While charging
After charging is
completed
10 minutes after
charging is
completed
The indicators
glow.
The indicators
blink once every
second.
The indicators blink
once every 2
seconds.
During use
After use
min.used
min.used
The used time is shown.
Th
Cleaning with the self-cleaning recharger
Care
Preparing the self-cleaning recharger
Remove the shaver and the appliance plug from the self-cleaning recharger.
11 Remove the water
tank and then open
the water tank cap.
22 Wash away the old
cleaning liquid and
then rinse the water
tank.
33 Pour tap water into
the water tank.
Do not let the water rise ab
Cleaning the shaver
11 Insert the appliance plug.
22 Plug in the adaptor.
Remove any soap or water on the shaver if
it has been washed with hand soap or any
other detergent.
•
2
1
33 Remove the protective cap
and then attach the shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or
damaged when you are attaching the
s
Follow the steps outlined below if the status lamp blinks or
glows during the “Clean/Dry/Charge” course.
Blinks
Glows
Correctly set the
detergent cartridge and
then restart a course.
Remove the shaver from the self-
cleaning recharger and then
check that the [CLEAN] lamp has
gone out. (Be careful as the blade
may be hot or wet.) Check that
the water ta