Raisecom ISCOM2852 Operation & User’s Manual

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages ...

The Raisecom TAC is available to all customers who need technical assistance with a Raisecom product, technology, or, solution. You can communicate with us through the following methods: Address: 2nd Floor, South Building of Rainbow Plaza, No.11 Shangdi Information Road, Haidian District, Beijing 100085 Tel: ...

Chapter 1 Overview ------------------------------------------------------------------------------------- 3 1.1 Overview of this manual -----------------------------------------------------------------------------------------------------3 1.2 ...

This manual is for users of ISCOM2852 switch with hardware version higher than VER. A.00. Who Should Read This Manual This manual is a reference for device installation and maintenance staff. Relevant Manuals 《ISCOM2852 Series Switches Commands Notebook》 《ISCOM2852 Series Switches Configuration Guide》 Organization Chapter 1: ...

1 General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appe ...

2 be present inside certain products even when the power switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist. Before working on equipment c ...

3 Chapter 1 Overview 1.1 Overview of this manual This manual mainly discusses the installation of ISCOM2852 switch. It describes the features of the switch, introduces its components and the functions these components accomplish. The manual brings forth a normativ ...

4 Chapter 2 Specification and Dimension 2.1 Device hardware description ISCOM2852 Ethernet Switch is a layer-2 Ethernet switch designed for network users’ access to the carriers’ network. ISCOM2852 provides 48 10/100BASE-TX Ethernet interfaces in the form of R ...

5 Chapter 3 Device Appearance 3.1 Device front panel description 48 RJ-45 interfaces, 4 SFP interfaces, 1 CONSOLE interface and dozens of status indicators are placed on the front panel of ISCOM2852 switch (see the figure below). In the figure shown above: ① The ...