Panasonic KX-TGF350 Operating Instructions Manual

Model No. KX-TGF350 KX-TGF352 KX-TG572SK KX-TGF353 Model shown is KX-TGF350. Before initial use, see “Getting Started” on page 8. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 57. For assistance, visit our Web site: www.panasonic.com/support fo ...

Accessory information ........................................3 Important Information For your safety ....................................................5 Important safety instructions ...............................6 For best performance .........................................6 Other information ................................................6 Specifications ............... ...

Quantity KX-TGF350 KX-TGF352 KX-TG572SK KX-TGF353 A AC adaptor/PNLV226Z 1 1 1 B Telephone line cord*1 1 1 1 C Desk stand/Wall mounting adaptor*2, *3 1 1 1 D Cor ...

Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit www.panasonic.com/batterystore Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Headset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430 T-adaptor KX-J66 Range extender KX-TGA405*2 Key detector KX-TGA20*3 *1 Replace ...

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electr ...

R The batteries should be used correctly, otherwise the unit may be damaged due to battery leakage. R Do not charge, short-circuit, disassemble, or heat the batteries. R Do not dispose of batteries in a fire. R Remove all the batteries when replacing. R Do not mix old, new or different types of batteries. R It is recommended that batteries are replaced annually. R It is recommended that batteries are repl ...

Cordless Telecommunications 6.0) R Frequency range: 1.92 GHz to 1.93 GHz R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 0.7 W Maximum: Approx. 3.0 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please v ...

Connect the AC adaptor to the unit by pressing the plug firmly. Connect the telephone line cord to the unit until you hear a click. Fasten the AC adaptor cord and the telephone line cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Conn ...

Charge for about 7 hours. R Confirm “Charging” is displayed (1). R When the batteries are fully charged, “Fully charged” is displayed. 1 Handset battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 13 hours max.*1 Not in use (standby) 12 days max.*1 *1 If eco mode is on. Note: R Actual battery performance de ...

the batteries with new ones as soon as possible. If you replace Ni-MH batteries with alkaline batteries, insert the Ni-MH batteries into the base unit again after the power is restored so that they will be recharged. Battery saving mode setting This feature allows the base unit to reduce its power consumption by limiting the available functions and therefore extend battery life during a power failure. The fo ...

Speaker M N (TALK) Headset jack Dial keypad (*: TONE) MZN (SP-PHONE: Speakerphone) Microphone Receiver Display MOFFN MFLASHN MCALL WAITN MCALL BLOCKN Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key – MDN, MCN, MFN, or MEN: Scroll through various lists and items. – VOL. (Volume: MDN or MCN): Adjus ...

ANSWER ON/OFF indicator MERASEN M N (PLAY/STOP) Message indicator Desk stand/Wall mounting adaptor R The adaptor is a removable attachment for desk stand or wall mounting use (page 47). n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key – MDN, MCN, M N, or M N: Scroll through various lists and items. – VOL. (Volume: MDN or MCN): Adjust the ...

Handset: MOFFN Base unit: MEXITN Voice guidance language You can select either “English” or “Español” as the voice guidance language of the answering system. The default setting is “English”. You can configure this setting using either the base unit or one of the handsets. Handset / Base unit 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN 3 Proceed with the operation for your unit. Handset: ...

1 Lift the handset and dial the phone number. R To correct a digit, press MCLEARN. 2 M N 3 When you finish talking, press MOFFN or place the handset on the charger. Using the speakerphone 1 Dial the phone number and press MZN. 2 When you finish talking, press MOFFN. Note: R To switch back to the receiver, press MZN/M N. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 ...

number “9” when making outside calls with a PBX: Handset 1 9 a MDN (Pause) 2 Dial the phone number. a M N Base unit 1 9 a MPAUSEN 2 Dial the phone number. 3 Lift the corded handset. Note for handset and base unit: R A 3.5 second pause is inserted each time you press MDN (Pause) on the handset or MPAUSEN on the base unit. Answering calls Using the handset 1 Lift the handset and press M N or MZN when the unit ...

ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller’s information is displayed on the handset ...

– between a handset and the base unit Handset 1 During an outside call, press MMENUN. 2 MbN: “Intercom” a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer: Press MOFFN. To establish a conference call: MMENUN a MbN: “Conference” a MSELECTN R To leave the conference, press MOFFN ...

– between handsets – between a handset and the base unit Note: R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds. – Handset: To finish intercom, press MOFFN. To answer the call, press M N. – Base unit: To finish intercom, place the corded handset on the cradle. If the speakerphone is used, press MZN. To answer th ...

button You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. Handset / Base ...

MSELECTN 3 MMENUN a MbN: “Add” a MSELECTN 4 Enter the phone number (24 digits max.). 5 MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: “Block a single number” a MSELECTN a MADDN 3 Enter the phone number (24 digits max.). 4 MSAVEN a MEXITN Storing a range of number Handset 1 MCALL BLOCKN 2 MbN: “Block range of numbers” a MSELECTN 3 MMENUN a MbN: “Add” a MSELECTN 4 Enter the desired number (2-8 digits). 5 M ...