Richmond CUT-40F Instruction Manual
Text of Richmond CUT-40F Instruction Manual
CUT-40F, CUT-50F, CUT-60F, CUT-80, CUT-100
PILOT ARC INVERTER PLASMA CUTTER
INSTRUCTION MANUAL
Thank you for using our cutting machine!
For your safety, please read this manual book before operation.
2
GURANTEE
We give our unreserved guarantee that the Inverter Welding and
Cutting machines comply with IEC974 international safety
standard. Maintenance for one year since the date of purchase.
Service of this equipment is restricted to train
Following attentions should be observed for safety guarantee
a.
Confirm the followings such as supply power connected from your side, the spot for welder’s
installing, high-pressure gas, storage of workpiece and the treatment of rubbish according to
your national laws or your company’s standards.
b.
On spot of welding
To avid from the injure and hurt
Place the cables nearly to the floor or ground with extending position.
j.
Place the cables of workpiece and cables of torch in parallel.
k.
The grounding of workpiece can’t be used together with other machines.
4
Plasma cutters work by sending a pressurized gas, such as air, through a small channel. In the center of this
channel, you'll find a negatively charged electrode. The electrode is at the center, and the nozzle is just below it.
The swirl ring causes the plasma to turn rapidly as it passes. When you apply power to the negative electrode,
and you tou