Acer S182HL Operation & User’s Manual

Text of Acer S182HL Operation & User’s Manual

TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1 Information for your safety and comfort.................................. 2 Unpacking ................................................................................... 5 Attaching/Removing the base .................................................... 6 Scre
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen
Information for your safety and comfort
Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as pos
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: • the power cord or plug is damaged, cut or f
Warning! We do not recommend using the product on a couch or bed. If this is
unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. -----------------------------------------------------------------------------
Please check the following items are present when you unpack the box,
and save the packing materials in case you will need to ship or transport the monitor in future. • User Manual AC Power Cord • D-Sub Cable • Quick Start Guide • DVI Cable • AC Adapter • S19 HQL 2010 S19 HQL LCD monitor (Optional) (Optional) $'0 2
Attaching the Base
SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 15 degrees up or 5 degrees down as indi- cated by arrow below. --------------------------------------
CONNECTING THE POWER CORD
• Check first to make sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC Inlet, plug another end to a pr

Acer Monitor Owners Instructions: