Samson TCM-3 Instruction Manual
Text of the manual
LOCATIONS OF CONTROLS
1. POWER ON/OFF
2. FUNCTION SELECT BUTTON
3. VOL UP/VOL DOWN
4. MODE BUTTON
5. AF FUNCTION (ALTERNATIVE FREQUENCIES)
6. BAND BUTTON (BND)
7. AUTO SEEK SEARCH TUNING (AS/PS)
8.9. AUTOMATIC OR MANUAL TUNING (FREQ UP
OR FREQ DOWN
/ CD
TRACK/SEARCH BUTTON
10. CD EJECT BUTTON (
)
11. CD SLOT
12. LCD DISPLAY
13. PAUSE
1. ANTENNAE *1
2. 6PINCONNECTORWIRE *1
3. INSTRUCTIONMANUAL
4. ANTENNAESOCKET*1
5. SCREW*4 FRONT
6. SCREW*2 SIDE
7. SCREW*2 ANTENNAE SOCKET
1. POWER ON/OFF
By pressing this key (1), the unit is switched on and off.
This unit is turned on by pressing any key.
2. SELECT (SEL)
3. VOLUME KNOB
Rotate Volume up/down knob to control the VOLUME to select other functions, press the SEL
(2) button shortly until the desired functions is shown on the display.
Figure 1 shows
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
(4)MASK DPI (2)
When press the SEL button for more than 2 seconds, it is activated as selecting mode of these
function.
MASK DPI: masked only the AF which has different PI.
MASK ALL: masked the AF which has different PI and NO RDS signal with
-Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
6. BAND BUTTON (BND)
Each band is toggled cyclically by pressing this key FM1-FM2-FM3-MW1-MW2.
7. AUTO SEEK SEARCH TUNING (AS/PS)
By pressing shortly, the radio searches for each preset Station.
When field strength level is bigger than the th
continually repeated until the Track Repeat mode is cancelled by pressing RPT button (15)
again.
16. RANDOM BUTTON (RDM)
When this button is pressed, RDM indication is displayed and each track of the disc are
played in random instead of normal progression.
To cancel RANDOM mode, press RDM button (16) again.
17,18. 10 TRACK DOWN/UP SELECT:
(In cas
Frequency range 87.5-108.0MHz
Channel step 50 KHz
Intermediate frequency 10.7MHz
Sensitivity 2uV at 30 dB S/N
Signal to noise radio >60dB
MW SECTION
Frequency range 522-1620KHz
Channel step