Acer V55LA-2 Safety Instructions

this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. 'LVFODLPHU This company makes no representations or warranties, either e ...

future reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing ...

this product where persons will walk on the cord. 10. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes. 11. Never push objects of any kind int ...

recommend. Use of another battery may present a risk of fire or explosion. Refer battery replacement to a qualified serviceman. 15. Warning! Battery may explode if not handled properly. Do not recharge, disassemble or dispose of in fire. Keep away from children and dispose of used battery promptly. 16. Use only the proper type of power supply cord set (provided in your keyboard/manua ...

a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause ...

enable you to operate the system properly. Manual Structure This user’s guide consists of two chapters. Chapter 1 System Board This chapter describes the system board and all its major components. It contains the system board layout, jumper settings, cache and memory configurations, and information on other internal devices. Chapter 2 BIOS Utility This c ...

Text entered by user Represents text input by the user. Screen messages Denotes actual messages that appear on the screen. , , , etc. Represent the actual keys that you have to press on the keyboard. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Give ...

1.1.1 System Board..............................................1-3 1.1.2 Slot Boards..................................................1-4 1.2 Jumpers and Connectors ...........................................1-5 1.2.1 Jumper and Connector Locations ...............1-5 1.2.2 Jumper Settings........................................... ...

1.11 Installing ISA Cards ................................................. 1-28 1.12 Error Messages........................................................ 1-29 1.12.1 Software Error Messages ......................... 1-29 1.12.2 System Error Messages ........................... 1-29 1.12.3 Correcting Error Conditions ...................... 1-32 Chapter 2 BIOS Utility 2.1 Entering Setup ..... ...

2.4.1 Power Management Mode ........................2-14 2.4.2 Monitored Activities ...................................2-15 2.4.3 QuickStart State Timer..............................2-15 2.4.4 Point Device Location................................2-15 2.5 System Security Setup .............................................2-16 2.5.1 Disk Drive Control................................. ...

1-1 System Board Layout................................................. 1-3 1-2 2-PCI/3-ISA Slot Board (for Aspire desktop systems)..................................................................... 1-4 1-3 3-PCI/4-ISA Slot Board (for Aspire minitower systems)..................................................................... 1-4 1-4 System Board Jumper and Connector Locations....... 1-5 1-5 Installing a SIMM..................... ...

1-1 System Board Jumper Settings ..................................1-6 1-2 SW2, JP7, JP43, and JP44 Settings ..........................1-7 1-3 SW2 Settings (Onboard Sound Chip).........................1-8 1-4 SW2 Settings (Password Security).............................1-8 1-5 Connector Functions...................................................1-9 1-6 Memory Configurations (64-bit) ................................1-11 1-7 Memory Con ...