Patton electronics SmartNode 4634 Series Quick Start Manual

VoIP Gateway Routers Quick Start Guide Approval—This device is approved for connection to the public ISDN telecommunication network, over BRI/S0-ISDN interfaces. Zulassung—Zugelassen für die Anschaltung an das öffentliche ISDN Telekommunikationnetz an BRI/S0-ISDN Schnittstellen. Aprobación—Este aparato está aprobado p ...

1.0 Power up the SmartNode 1. Connect the SmartNode to the mains (AC) power source with the power cable. 2. Wait until the Power LED stops blinking and remains constantly lit. Now the SmartNode is ready to configure. 2.0 Connecting the SmartNode to your laptop PC • This device contains no user serviceable ...

3 Figure 1. Connecting to the PC 1. Connect the PC’s Ethernet port to LAN (ETH 0/1) port of the SmartNode 4630. The SmartNode 4630 Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through Ethernet cables for host or hub/switch connections. (See figure 1.) 2. The SmartNode comes with a b ...

3.2 Login 1. To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the address field: 192.168.1.1. Accessing your SmartNode via a Telnet session displays the login screen. Type the factory default login: administrator and leave the password empty. Press the Enter key ...

5 In general, the SmartNode will connect to the network via the WAN (ETH 0/0) port. This enables the SmartNode to offer routing services to the PC hosts on LAN (ETH 0/1) port. The SmartNode 4630 Series provides an auto- MDX feature for both Ethernet ports, so you can use a straight-through or cross-over cable to connec ...

Note Patton regularly adds new configuration templates to the collection at www.patton.com/voip, so if you do not see your application on the CD-ROM, it may have been added to the website. Note If your application is unique and not covered by any of Patton’s configuration templates, you can man- ually configure ...

7 Telephone support: • Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to 2200 UTC/GMT) • Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800 UTC/GMT) Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland) B.0 Compliance In ...

B.3 ISDN compliance This device is approved for connection to the public ISDN telecommunication network. B.4 CE Declaration of Conformity Product Description: SmartNode 4630 Series This equipment conforms to the requirements of Council Directive 1999/5/EC on the approximation of the laws of the member states relati ...

9 Copyright statement Copyright © 2008, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The term SmartNode is a trademark of Patton Electronic ...

Notes ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________________________ ...