Pentair EZ3400 EasyTouch Owner's Manual
Text of the manual
Rev. C 10-31-02
1
P/N 520044
Model EZ3400 EasyTouch Owner’s Manual
4-Function Hand-Held Wireless Remote Control
Important Notice
Attention Installer.
This manual contains important information about the installation, operation and safe use of this
product. This information should be given to the owner/operator of this equipment.
Before installing this p
Rev. C 10-31-02
SECTION I.
APPLICATION
Used in conjunction with the following Compool Control Systems:
CP3400, CP3600, CP3800, CP3810 and CP3830.
Provides switching of four remote control circuits from a wireless hand-held remote.
It is typically used for activating the spa circulation, and for operating three auxiliary pieces of equipment
(su
Rev. C 10-31-02
3
P/N 520044
SECTION V.
CABLE SPLITTERS (OPTIONAL)
Most Power Center circuit boards include 2-qty. COM PORT sockets. However, if there is no unused
COM PORT socket available, it will be necessary to use a Cable Splitter (P/N 6CONDDUAL).
Disconnect the existing Indoor Remote cable from the COM PORT socket.
Plug the short cable (attached to
Rev. C 10-31-02
SECTION VIII.
RECONFIGURING FUNCTIONS ON THE HAND-HELD REMOTE
There are 4-qty 4-position configuration switches (designated SW1, SW2, SW3 and SW4) located on the
Receiver circuit board. These switches are used to configure the four buttons on the Hand-held Remote:
SW1 will configure Spa Button (of the Hand-held Remote).
SW2 wi
Rev. C 10-31-02
5
P/N 520044
SECTION IX.
CUSTOMIZING THE COMMUNICATION LINK
The communication link between the Receiver and Hand-held Remote can be customized to prevent electrical
interference. To accomplish this, there is a 10-position configuration switch located on the Receiver circuit board,
and inside the Hand-held Remote. Units are shipped from th
