Pfaff PowerLine 2231 Setup Instructions

or in part - is only permitted with our prior consent and with reference to the source. PFAFF Industriesysteme und Maschinen AG Hans-Geiger-Str. 12 - IG Nord D-67661 Kaiserslautern ...

1.01 Explanation of the symbols .......................................................................................... ...

All notes in Chapter 1 Safety of the Instruction Manual must be observed! There must be suitable electrical connections at set-up site, see Chapter 3 Specifi cations of the Instruction Manual. A fi rm, level surface and adequate lighting must also be available at th ...

The scope of delivery of the machine depends on the order. Before setting up the machine, check whether all the required parts have been included. The following description only applies to one special sewing machine, for which all individual components have been delivered by the PFAFF Industriesysteme und Maschinen AG. 2.01 Sewing machi ...

Description / No. of pieces Sewing head support (1x), Tilt lock (1x) (only on the PFAFF 2542, 2545 and 2546) Oil pan with screws and washers Industrial Oilcan (1x), Sachet with 80 ml oil, Dusting brush (1x) Sewing head protective cover (1x) Allan key 3 mm (1x), Screwdriver large (1x), Screwdriver small (1x) Control panel bracket ...

Description Motor mounting with motor and fastening screws Control box with fastening screws A B C D F1 + - TE PM Control panel bracket with control panel and fastening screws Speed control unit with holder and fastening screws, and connecting rod to the pedal Scope of delivery 2.02 Accessories for the sewing machine dri ...

Description Motor mounting with motor and fastening screws Control box with switch, fastening screws and cable Adapter cable for synchronizer A B C D F1 + - TE PM Control panel bracket with control panel and fastening screws Scope of delivery 2.03 Accessories for the sewing machine drive with EcoDrive P74 ED-L ...

Description Speed control unit with holder and fastening screws, and connecting rod to the pedall Scope of delivery ...

3.01 Table top cutout 3.01.01 On machines with 350 mm clearance width Stand and table top 906-4001-151 Vers. 08.04.08 115 80 106 60 240,5 92 364 517,5 30 40 (2x) 99 (2x) R 22 46 60° (4x) R 22 22 R 9 (4x) 5 206 +0,4 233,5 +0,4 (2x) 80 - 0,4 (2x) R 10 (4x) 208 +0,4 (2x) 644 R 23 (2x) R 9 (4x) 14 +0,4 (2x) 14 +0,4 (2x) R8 (4x) ...