max mobility PushTracker Operation & User’s Manual

antioch, tn 37013 usa p: 800.637.2980 f: 888.411.9027 Informational videos available at www.max-mobility.com max mobility, llc ® Rev. PushTracker PT1-USM Rev. A Wheelchair Activity Monitor It is STRONGLY recommended to contact MAX Mobility directly for service if you live inside the U.S. and your device is still under warranty! To get the most out of your PushTracker, download the PushTracker App from the Apple or Google Play Store. ...

Specifi cation Sheet Manufacturer: Max Mobility, LLC Address: Phone : (615) 953-5350 / Toll-Free (800) 637-2980 PushTracker Model: 1 Contained battery type: Lithium-Ion (Lithium-Ion Polymer) Nominal operating voltage: 3.8 V Electric charge: 90 mA-h Wireless operating band: 2.4 GHz (2.4000 to 2.4835 GHz) Wireless power transmission: 0 dBm to -23 dBm Expected lifetime (except battery) / service life: 5 years Expected battery lifetime: 2 years Contains Bluetooth® LE: FCC ID QOQBT113 IC ID 5123A-BGTBLE113 Water resistance: IPX4 (Splash proof) - Do not shower with the device or submerge it in water. Wrist circumference range: S ...

Table of Contents 1. Introduction 1 Intended Use of the PushTracker. . . . . . . . . . . . . . . . 1 Warnings and Safety Precautions. . . . . . . . . . . . . . . 1 Electromagnetic Interference (EMI). . . . . . . . . . . . . . 2 Bluetooth Wireless Communication. . . . . . . . . . . . . . 2 List of Components. . . . . . . . . . . . . . . . . . . . . .3 2. Using Your PushTracker 3 Attaching Your PushTracker ...

Intended Use of the PushTracker The PushTracker is intended to be used to operate the SmartDrive Wheelchair Power Assist device and to monitor your wheelchair activity. Warnings and Safety Precautions Handling or use of the PushTracker or SmartDrive by anyone who has not received proper instruction from this manual or the SmartDrive User’s Manual may result in serious injury or death. 1. Introduction Always inspect your PushTracker for missing parts / damage prior to each use [see the “Maintenance” section for parts to pay attention to]. Make sure the PushTracker is charged before use. When crossing major roads, inter ...

NOTES: PushTracker Serial Number: __________________________ Figures and diagrams of the PushTracker in this manual may vary slightly from your device. An electronic version of this User’s Manual along with informational videos are available on our website [www.max-mobility.com / www.pushtracker.com] for people with visual, reading or cognitive disabilities. The Serial Number of your PushTracker is located on the bottom of the PushTracker housing. It is recommended that you save this User’s Manual and record the Serial Number below for reference. Electromagnetic Interference (EMI) Refer to the SmartDrive User� ...

6 10 8 1 2 7 4 3 9 1. OLED Display 2. Power Assist Button 3. App Connection Button 4. Charging LED 5. Indication LED 6. Buckle Band (Black) 7. Clasp Assembly 8. Strap Band (3 Sizes / Black) 9. USB Charging Port 10. Strap Holder List of Components 2. Using Your PushTracker Attaching Your PushTracker The PushTracker is designed to comfortably and securely attach to the top part of wrists of all sizes. It has an embedded accelerometer to recognize when you push, when you want to activate the power assist and also when you tap your hand against the handrim to deactivate the power assist. Additionally, it is equipped wi ...

Once the power assist is turned ON [OLED displays “SD ON”] and the PushTrack- er is connected to the SmartDrive, the Indication LED will flash blue. When the SmartDrive motor is driving, the Indication LED will be solid blue. The Indication LED will flash red when the PushTracker is trying to connect or has lost wireless connection to the SmartDrive. Whenever there is a change of state to the Smart- Drive, you will feel vibration as additional indication from the PushTracker. Display Information Slowly SINGLE tap the PushTracker Display to scroll through the different items. It is recommended that you turn OFF ...

3. Settings Menu Settings Descriptions Press and hold the App Connection Button for three (3) seconds to enter the settings menu. Settings Menu Displays when you are entering the Settings Menu. SmartDrive Settings Select this to go to the submenu to adjust the way your SmartDrive works [see “SmartDrive Settings” for menu options]. Time & Date Set the date and time manually. For most accurate results, connect to the PushTracker App and it automatically uses the time from your smartphone. Here you can switch between 12 and 24 hr display. App Pairing Initial pairing to the PushTracker App. Make sure Bluetooth® is enabled ...

4. Batteries Battery Information The PushTracker houses a rechargeable Lithium Ion Polymer (LIP) battery used to power it. The battery is designed to last for an entire day of SmartDrive operation and wheelchair propulsion activity monitoring. Low PushTracker battery is indicated by a flashing battery symbol on the display. It is encouraged to charge the battery every night to avoid running out of charge during daily use. The life of the battery will not be deteriorated by charging when it is partially drained. Make sure the charging receptacle is completely dry and free from debris. Blow water out of the receptac ...

5. Maintenance Inspection Always inspect the PushTracker for missing parts / damage prior to each use. Cease use and contact Max Mobility or your mobility equipment dealer if you notice any of the following: • Broken or cracked plastic • Missing or loose screws • Charging port damage • Broken buckle or ripped bands • Damaged Display Cleaning Cleaning of the PushTracker can be done by wiping all of the parts down with a damp wash rag. This should be done as needed. Do not throw away the PushTracker. Please properly dispose of the battery by recycling at the end of its life or send it back to Max Mobility. PushTra ...

Other Maintenance Contact Max Mobility or your mobility equipment dealer for any other maintenance or replacements [i.e. PushTracker battery] that the device might need. Troubleshooting Contact Max Mobility or your mobility equipment dealer for any other issues that you experience with the device. 6. Warranty Max Mobility offers a 2 year warranty against manufacturing defects. Max Mobility’s obligation under this warranty shall be limited to repairing or providing replacement of part(s), which are found to be defective. Any part(s) of the system replaced by us at our discretion shall be with a functionally oper ...