Koncept KE1020A Install Manual

Table of Contents 1 Check for Required Items ............................................................................2 2 Installation Steps ........................................................................................2 2.1 Installation View .................................................................................. ...

Please check to be sure that you have all of the following components: • Broad internet access • One phone cord • One power adapter • One VoIP phone • One handset • One Ethernet (RJ45) cable 2 Installation Steps 2.1 Installation View Please install your KE1020A as the connection chart above. 2.2 Connection Chart to Dete ...

diagram and determine the number of your configuration. The lines marked 2, 4, 5,6,7,8 are Straight-through Ethernet cable, the line marked 3 is Crossover Ethernet cable. If the ADSL/CABLE Modem has the auto-reversal function (it usually has the function), the li ...

2 a b c 2 A B C 2 3 d e f 3 D E F 3 4 g h i 4 G H I 4 5 j k l 5 J K L 5 6 m n o 6 M N O 6 7 p q r s 7 P Q R S 7 8 t u v 8 T U V 8 9 w x y z 9 W X Y Z 9 0 space ( ) @ _ * & 0 % # ^= + < > 0 * * ! Note: 1. The asterisk (*) can be used as a radix point (period) only when inputting numbers. 2. If you need to ent ...

3.1.3 Account settings Press SET/OK>DOWN>Account Settings>SET/OK. Then use UP/DOWN button to select the options you need to set. At the SIP Server screen, presses ESC/OK>input SIP Server address>press ESC/OK. Please use the same method to set Domain, User ID, Password, IP phone No.. 3.1.4 Saving ...

the required IP parameters to any device connected to it when the device log on. PPP ID/Password With PPPoE selected in IP Type drop down list, please enter the user name and password here. IP Addres/Subnet Mask/Router IP With Static IP selected in IP Type drop down ...

disable: Select this item when the sip proxy server and IP phone in the same LAN, or the sip proxy system supports the IP phone working behind the LAN. enable: When the system does not support IP phone working behind the LAN, please select this item to search public IP address of the NAT device. ...

without pressing # key under VoIP model（reserved） Dial Number When the hotline feature is selected in the Use DialPlan field, this field should contain the phone number you would like to dial automatically each time when you pick up the handset. LCD Menu Lock This fea ...

Parameter Description Access code The access code, which is masked on the Web page, is used to access the Web interface. The default value is 1234. It is strongly recommended that you change your access code. SNTP Server Address This field should contain the value for the SNTP Time Server. The default value is 216.53.3.44. D ...

Your network has a proxy server which is blocking the phone’s connection to the internet. The connection to the server’s port are screened Please contact the service provider or network administrator to ensure the network and ports are available. If there are problems left, please contact your servic ...