Nokia 447ZiPlus Service Manual
Text of the manual
When re---ordering manuals, please quote the model name and part number.
xx
Nokia Display Products Oy
P.O.Box 14
FIN---24101 Salo, Finland
17” Colour Monitor 447ZiPlus
TABLE OF CONTENTS
PAGE
1. Precautions and notices------------------------------------------2
2. Specification----------------------------------------------------------4
3. Control Location and Functions---------------------------------5
4. Disassembly instructions----------------------------------------- 7
5. General Connections & applications--------
1. PRECAUTIONS AND NOTICES
1-1
SAFETY PRECAUTIONS
1) Observe all cautions and safety related notes located inside the display cabinet and on the display
chassis.
2) Operation of these displays with the cabinet removed involves a safety hazard from electric shock.
Work on the display should not be attempted by anyone who is not thoroughly familiar with
prec
product safety notice
Many electrical and mechanical parts in this chassis provide special visual safety protection. The
protection afforded by them cannot necessarily be obtained by using replacement components rated
for higher voltage. wattage. etc..
Before replacing any of these components. read the parts list in this manual carefully. The use of
su
Time Table For Sync. Signal
Mode No.
1
2
3
4
Unit
Resolution
720 x 400
640 x 480
640 x 480
800 x 600
Horizontal Frequency
31.468
31.469
43.269
37.879
KHz
(A)Horizontal
31.774
31.778
23.11
26.4
usec
(B ) Horizontal Pulse
3.813
3.813
1.556
3.2
usec
(C ) Horizontal Back Porch
1.907
1.907
2.222
2.2
usec
(D) Horizontal Active Area
25.423
25.422
17.778
20
usec
3. Control Location and Functions
FRONT
Down/Brightness Key
Select Key
Up/contrast key
Power LED
Power Switch
Controls on front panel Function
1. Power LED
This indicator will light when the power cord is properly connected and the power switch is ON.
The state of the LED is dependent on the Power State of the monitor. When the LED is green, the
monitor is in the normal state. When it is yellow or amber, it indicates a power saving state.
2. Power Switch
Press t
4. Disassembly Instructions
Disassembly Instructions
1. Face Down The Monitor (Fig 4-1).
2. Back Cover Removal
a) Use small flat bladed screwdriver suitably protected against cabinet damage insert into the four
respective crevices Fig 4-2 ”A” where located on the crevices lateral side of the unit in the seam of
the back & front cover, hold and push th