Sanyo FXD-MP690 Operating Instructions Manual

High Power FM/MW/LW Stereo Receiver Compact Disc Player ISO Mounting with Removable Trim Ring Remote Control (English) OPERATING INSTRUCTIONS……………. 2~22 1 ...

DIGITAL DISPLAY .....................................................................................................................4 DETACHABLE FRONT PANEL .................................................................................................5 GENERAL OPERATION............................................................................................................6 RADIO OPERATION..................................................................................................................8 CD OPERAT ...

Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tracks during play. 3 Recommended CD-R/RW Media Data may not be properly written to CD-R/RW media depending on the quality of the media. If this happens, the data may not be reproduced correctly. We recommend the following manufacturers to insure proper quality of the media. CD-R Media TDK USA Corp., Taiyo Yuden (U.S.A.), Inc., Ricoh Corporation, Eastman Kodak Company, Maxell Corporation of America, Mitsubishi Chemical Corporation, Fuji Photo Film U.S.A., Inc., Mitsui Chemicals, Inc., Sony Corporation of America, Philips Electronics ...

Radio Frequency, Time, CD/MP3 Track Number, Audio Control Selected Mode FM Stereo CD running indicator Disc IN Local Directory indicator MP3 running indicator 4 ...

The front panel is designed to be removable for antitheft purposes. It is recommended that you remove and carry the front panel with you when you leave your car. B A HOW TO ATTACH THE FRONT PANEL Align the right side of the panel (A) with the stopper (B), and then push the left side of the panel into the unit until it clicks. HOW TO DETACH THE FRONT PANEL REL button Press the release button (REL) to release the front panel. Pull the entire panel to remove it from the unit. RETURNING TO THE INITIAL SETTINGS RESET button When the front panel is detached, you can find the RESET button on the front side of the unit. Press the button, ...

9 5 TURNING THE POWER ON........................Any button Install the front panel and press any button (except REL and button) when ACC is on. TURNING THE POWER OFF ...............................….. 1 When system is on, press the POWER button 1 to turn off the unit. VOLUME LEVEL CONTROL.......................................2 Rotate the VOL dial 2 to adjust the volume level. ADJUSTING THE SOUND CHARACTERISTICS ..................................….........2, 3 Press the AUDIO/SET button 3 shortly: 1. Each time you press the AUDIO/SET button 3 shortly, the item changes as follows; VOL BAS TRB BAL ...

When BAND/LOUD button is pressed. When AS/PS/MP3 button is pressed. - BEEP ALL mode: The beep is generated when every button is pressed. - BEEP OFF mode: The beep is disabled. MODE SELECTION...................................……..….....4 Press SOURCE button 4 to choose desired listening mode. (e.g. radio mode to CD mode.) SET THE CLOCK……………...............................5,8,9 Press the DISP button 5, the clock is shown on the LCD display. Then hold down the button until the clock flashes. Then press the TUN/SEK/TRK button 8 to change hours or TUN/SEK/TRK button 9 to change minutes. LOUDNESS EFFECT... ...

Press SOURCE button 1 to select radio mode, the radio mode appears in the display together with the memory band and frequency. SELECTING THE FREQUENCY BAND……………..2 At radio mode, press BAND/LOUD button 2 shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 MW LW RADIO TUNING…………………………………………3 Press the TUN/SEK/TRK or button 3 shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, ...

The preset buttons 5 can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and MW, LW) for convenient access to your favorite stations. • Programming stations ..... 1. Select the desired band, then tune in the station you want to store in memory. 2. Press and hold one of the preset buttons 5 for more than 2 seconds until the corresponding preset button number appears. Repeat steps 1. and 2. to program additional stations. • Quick tuning .................... Select the desired band, then press one of the six preset buttons 5. LOCAL/DISTANT SELECTION ...........................…. ...

Insert a disc into the CD slot 1 and the CD player will start. The system remains in CD mode and “ ” appears in the display. Press the eject button 8 to eject a disc. SWITCHING TO CD MODE............................…..........2 Press the SOURCE button 2 with the power on to switch from radio mode or AUX mode to CD mode. When the CD mode is switched on while a disc is loaded, play resumes from the point at which play was stopped. When the entire disc has played, the unit returns to the first track and play resumes. SKIPPING TRACKS .................................... ...

spins. • The unit will turn-on automatically when a CD is inserted if the ignition switch is “ON”. REPEAT MODE ........................................................... 6 Press the RPT button 6 to play the current track repeatedly. To cancel this mode, press the RPT button 6 again. SHUFFLE MODE.......................................................... 7 This function plays the tracks on a CD in random order. Press the SHF button 7 to begin shuffle play. To cancel this mode, press the SHF button 7 again. SCAN MODE (PLAYING THE BEGINNING OF EACH TRACK) ................................ ...

Insert a disc into the disc slot 1 and the player will start. The system remains in MP3 mode and “ ” appears in the display. Press the eject button 8 to stop MP3 function and eject the disc form disc slot 1. SWITCHING TO CD (MP3) MODE.........................….....2 Press the SOURCE button 2 with the power on to switch from radio mode or AUX mode to CD (MP3) mode. When the CD (MP3) mode is switched on while a disc is loaded, play resumes from the point at which play was stopped. When the entire disc has played, the unit returns to the first t ...

Press the AS/PS/MP3 button 3 for two times. It enters into “Searching Directory or File Name” in Digital Audio CD. The unit searches files and directories by name which is designated by the user with the VOL A-Z /0-9 dial 4. Explain as follows: - Use rotary encoder VOL A-Z/0-9 dial 4 to select the characters A to Z, blank, 0 to 9, _, -, +. - Press AUDIO/SET button 15 to confirm entry of each characters. - Press BAND/LOUD/ENTER button 5 to start the title search. In case the selected title is a directory name, display will show (‘ ‘), then - Use rotary encoder VOL A-Z/0-9 dial 4 to ...

When you insert a mixed-CD disc into the CD slot, the “ ” appears in the display and it starts to play the CD audio tracks. And the operation is the same as that of the CD operation described in page 10. If you want to switch to play MP3 files, press DIR button 1 or DIR button 2, it will search the disc and start to play the MP3 files. And the operation is the same as the MP3 operation described in page 12. If you want to revert to play CD audio tracks, press DIR button 1 or DIR button 2 repeatedly, until it reaches to the end (i ...

1 SWITCHING TO AUX MODE.......................................1 The unit has a pair of auxiliary input terminals (see WIRING figure on page 21). This allows you to listen to an auxiliary audio source (MP3, portable cassette player, etc). Press the SOURCE button 1 with the power on to switch from radio mode or CD (MP3) mode to AUX mode. 15 ...

REMOTE SENSOR……........…………………..….…..IR Point the remote control handset to the remote sensor IR. Press the function keys on the handset to control the system. IR 16 ...

• Condensation Moisture can condense on the optical lens of the CD player during humid or rainy days, or after the car heater is turned on. If this occurs the disc player may not function properly. To remedy the situation, remove the disc from the unit and wait approximately one hour. This should allow the moisture to evaporate and restore normal operation. • Temperature Consideration The unit may not operate correctly in extremely hot or cold temperatures. Avoid exposing the unit to extremely high or low temperatures. • Interruptions in the sound (skipping) When the car is driven on very rough surfaces, the ...

the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom Cause Solution The volume control is turned down. Turn up the volume control. The compact disc does not play when inserted into the unit. The power connections are not wired correctly. Check the +12V and ground connections. The vehicle ignition is switched off. Switch the ignition to the “ON” or “ACC” position. No power. The fuse is blown. Replace the fuse with another 15A fuse. The unit does not work properly (Eject, Load, Play) The microcom ...

Carrying Case X1 Unlock Levers X2 Removable Trim Ring X1 Locking Screw X1 Mounting Strap and Screw X4 INSTALLATION Mounting Bracket (Half Sleeve) X1 INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 300. 19 ...

When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or console. 2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout. 3. Attaching the Mounting Strap to the underside of the dashboard, using screw. Attach the back of the unit to the Mounting Strap using support stem bolt and hardware. UNIT REMOVAL 1. Insert the unlock levers into the slots on each side of the unit until they click into place. 2. Pull the levers ...