Savant AMP-2000-00 Quick Reference Manual

Text of Savant AMP-2000-00 Quick Reference Manual

This Quick Reference Guide provides all the steps necessary to install

the 16-channel AMP-2000 amplifier. The following units are supported in this document: • AMP-2000-00 (North America) • AMP-2000I-00 (International) Box Contents (1) Savant 16 Channel Amplifier (AMP-2000-xx or AMP-2000I-xx) (2) Rack Mounting Brackets (8) Pan Head Phillips Screws for Brackets (M3 x 8 mm) (1) AC Power cord - 6 ft (4) 4-pin Screw Down Plug-in Connectors (4) Rubber Ch

Savant AMP-2000-00 Provides three options for turning the

AMP-2000 On and Off. • Constant (manual turn-on via the front panel master Power button) • Audio Sense • 3-24 AC/DC Voltage Trigger (External) See Setting the Amplifiers Turn On Mode for details. 3-24V AC/DC Voltage Trigger 3-24V AC/DC - 3.5 mm (1/8”) Mono jack Used to control the power state of the amplifier when Turn-on Mode switch is set to 3-24 AC/ DC Voltage Trigger mode.

The AMP-2000 must be provided with adequate ventilation for proper

cooling. • When installing the AMP-2000 in a cabinet, be sure that the rear of the cabinet is open to adequate air to provide proper cooling. • Be sure to leave a minimum of 3 inches clearance above and behind the amplifier and at least 2 inches on each side. • If installed in a rack, active thermal management (such as rack fans) is recommended. CAUTION! Do not block the

Savant Amplifier Owners Instructions: