Schlage SENSE Operation & User’s Manual

Codes du défaut Place Label Here Poner la etiqueta aquí Placer l’autocollant ici Setup Code Setup Code Setup Code Place Label Here Poner la etiqueta aquí Placer l’autocollant ici PLEASE KEEP THIS GUIDE You will need these codes to operate your lock! CONSERVE ESTA GUÍA ¡Necesitará estos códigos para operar l ...

videos, visit schlage.com or the Help Center in the Schlage Sense app U.S.A.: 888-805-9837 Canada: 800-997-4734 Mexico: 018005067866 Lock Setup....................................3 Lock Parts......................................4 Setup Code and Default Access Codes.... ...

warranty at Schlage.com/register, or register using the app! »» Please keep this guide This guide contains important information about your lock! •• Default access codes, HomeKit™ setup code, and Programming codes are located on the stickers on the front of this guide! You will nee ...

•• Used to silence the alarm. •• Does not lock or unlock the door. Thumbturn •• Used to lock and unlock manually from the ...

You can lock and unlock your door with a simple press using the Schlage Sense app! FROM THE OUTSIDE To Lock To Unlock 1. Press the Schlage Button. 2. The lock will lock. The green check mark will light once. 1. Press the Schlage Button. 2. Enter a valid access code. 3. The green success check mark will flash twice and one ...

In order to properly clean the touchscreen from build-up of dirt, oils, or other contaminates; you should use a mild dish soap with warm water and follow the general rules below: •• Do rinse the touchscreen with warm water prior to cleaning process. •• Do follow the application of soap with a damp, lukewarm cloth •• ...

NOTE: Existing access codes will be deleted when you configure your lock with the app! Schlage recommends using the Schlage Sense mobile app to program your lock. If you don’t have the Schlage Sense app, you can use the manual programming instructions below. WARNING Manual programming functions are NOT ava ...

after 30 seconds of inactivity. PROGRAMMING CODE Write your programming code here for easy access. WARNING Manual programming functions are NOT available after pairing using the mobile app! You must perform a Factory Default Reset to program your lock manually. ADDING ACCESS C ...

Just follow the instructions in the Schlage Sense application! These manual programming instructions will not work if you set up your lock with the app! ENABLE/DISABLE 1-TOUCH LOCKING Press Enter Programming Code Press 7 Programming indicator light solid 2 blinks + 2 beeps CHANGE ACCESS CODE LENGTH Press Enter Programming Code Pres ...

access codes! If you are not using the Schlage Sense app, use these tables to record programming and access codes that you program into the lock. »» Use a pencil to enter the codes in the boxes so you can easily change them later. •• The Programming Code can be any combination of six ...