Schwaiger DTR 540 Operating Instructions Manual

Controls, displays and connections.............................................................................................6 Connecting up the receiver......................................................... ...

purchase (receipt, invoice, delivery receipt etc.). Please keep these documents in a safe place. Our guarantee is based on our guarantee conditions in force at the time of purchase. In the case of a necessary repair, take or send in the unit to your specialist dealer. Disposal information for packaging Packaging materials can be recycled and should always be submitted for recycling. Packaging materials such as plastic bags do not belong in the hands of children. Safety and installation information All of our products at t ...

unit! The mains adaptor / mains plug must only be connected to a 230 V~/50 Hz mains supply The mains adaptor / mains plug must be accessible at all times so that the unit can be unplugged from the mains outlet. Only connect the mains adaptor / mains plug to an earthed power outlet! The mains adaptor / mains plug must only be plugged in once installation has been completed according to the instructions. The unit must not be used if the mains adaptor / mains plug is faulty or the unit is damaged in any other way. Avoid ...

Front of unit 1 Display or 1a LED: Display LED - red receiver is in standby mode. Channel display green receiver is switched on rEC. timer is active FAIL short circuit or antenna input overload Back of unit 2 Connector for mains adaptor +12V 3 VHF/UHF Input Digital – antenna socket for the roof or room antenna. 4 RF Output - HF-output for connecting a HF-cablel to the antenna socket of your television or video recorder. 5 VCR scart socket for connecting a video recorder. 6 TV scart socket for connecting the receiver to a television set. Side of unit 8 RJ-11 socket: IR connection for an infrared mouse and inte ...

You will find the corresponding labelling on the back of the unit (see diagram on page 5). Connecting an antenna Connect the antenna cable from the roof or room antenna to the RF INPUT DIGITAL socket (3) on the receiver. Via this connection you can power an antenna with signal amplifier with a DC voltage of 5VDC (max. 50mA). WARNING: The antenna voltage must only be switched on if the antenna actually is an active room antenna with signal amplifier and if it does not already have a power source of its own (mains adaptor or similar). Otherwise this may result in a short circuit or may destroy your antenna. The RF OUTPUT sock ...

0-9 Direct channel number input. In the menu: enter channel parameters EPG/i Select the Electronic Programme Guide (EPG).. LIST Display the channel list VOL◀ ▶ Adjust volume. In the menu: browse through lists or enter values. CH ▲ ▼ Change channel. In the menu: select a menu line. OK Quick channel information. In the menu: open, confirm or edit the currently highlighted item SWAP Swaps between the two most recently selected channels. In the menu: move channels and change lists. EXIT Exit the currently active menu or OSD display MENU Activates the main menu (back with EXIT). TV Switch between TV ...

the section on connecting up the receiver, plug the mains adaptor into the power outlet. When using the unit for the first time, you will see the welcome screen of the installation assistant. With the aid of the installation assistant you can configure the most important settings on your digital receiver with ease. Menu language In the first step of the installation use the CH s or CH t buttons to select the desired language (Deutsch, English, Italiano, Polski, Français, Cestina, Türkçe, Magyar, Español) for all menus an ...

Switching on and off - You can switch on the receiver with the OK or button, change channel or one of the number buttons. The last active channel will be displayed. (e.g. 0015) - To switch the digital receiver into standby mode, press the button. Display: – or red LED. NOTE: The digital receiver is only fully disconnected from the mains when it is unplugged from the mains outlet. Selecting operating mode You can choose between TV (television programmes) and RADIO (radio stations) modes. - Select the desired mode with RADIO or TV. Adjusting the volume The volume cannot be adjusted while in menu mode. - Set the desired vo ...

Use CH s oder CH t to select the desired channel and confirm with OK. In the Alphabet list, all channels are sorted in alphabetical order. To search for a channel, press SWAP to switch to the window with the letters of the alphabet. Using CH s t und VOL◀ ▶ select the first letter of the channel you are searching for and confirm with OK. This will display the page of the channel list on which channels beginning with the relevant letters are stored. Press SWAP to return to the channel list then select the desired channel with CH s t and OK. 4. Switching from the current to the previ ...

1) Scart Output TV Using the VOL◀ ▶ buttons, you can select the output signal for the scart socket (FBAS, RGB (optional), YUV or Y/C) to suit your television set. 2) Time difference After switching the receiver on for the first time you should set the difference between your local time and the received GMT time. Make the setting using the VOL◀ ▶ buttons. For central Europe winter time is: +1.00 hour and summer time: +2.00 hours. You will have to update this setting with each change between winter and summer time. 3) Selecting the menu language UIse the VOL◀ ▶ buttons to select the desired menu language. 4) Scre ...

1) Start volume You can use the VOL◀ ▶ buttons to set the start volume of the receiver. 2) Sound setting You can use the VOL◀ ▶ buttons to choose between Stereo, Mono left or Mono right. 3) Audio channel TV You can use the VOL◀ ▶ buttons to select the SCART output audio channel for the current channel, if the current programme being transmitted offers more than one option. 4) Audio channel digital You can use the VOL◀ ▶ buttons to select the audio channel for the receiver’s digital output for the current channel. Press EXIT to leave the menu. Use the VOL◀ ▶ buttons to choose whether you want to store ...

Your receiver features a child lock which lets you lock the unit against unauthorized use. When the child lock is activated, the receiver can only be switched on after entering a four-digit PIN code. In the Main menu use the CH ▲ ▼ buttons to move the cursor to the line Child lock and press the OK button. The following menu will appear: Child lock – Device lock To activate or deactivate the lock, move the cursor to the line Device lock and press OK. . The following menu will appear Use the VOL◀ ▶ buttons to switch the lock on or off. When the lock is activated, the PIN code must be entered when switching on the rece ...

The following menu will appear Use CH ▲ ▼ to make a selection and confirm this with OK. Use CH ▲ ▼ to select the line Reception and confirm with OK Here you can use the VOL◀ ▶ buttons to switch the antenna voltage on or off. WARNING: The antenna voltage must only be switched on if the antenna actually is an active room antenna with its own signal amplifier and does not already have a mains adaptor of its own (or similar) to supply it with power. Otherwise this may result in a short circuit or may destroy your antenna. Press EXIT to leave th ...

1. Use CH s t to select the line Search mode and use the VOL◀ ▶ buttons to select automatic. 2. In the line Encrypted use the VOL◀ ▶ buttons to select whether you also want to search for encrypted channels. No = encrypted channels will be ignored. Yes = encrypted channels will be included in the search. 3. Use the CH s t buttons to move the cursor to the line Start channel search then press the OK button to start the search Two windows will now be displayed listing the newly found TV channels and radio stations. In the Status window you can see how far the search has progressed. - Display: Scann ...

3. In the line Channel use the VOL◀ ▶ buttons to select the channel to be searched. 4. Use the CH s t buttons to move the cursor to the line Start channel search then press the OK button to start the search. Two windows will now be displayed listing the newly found TV channels and radio stations. In the Status window you can see how far the search has progressed. - Display: Scanning => search is active - Display: Complete => search has been completed. When leaving the menu (EXIT button) you will be asked whether you want to store the new channels (Yes) or delete them again (No). Make your ...

You can store your favourite channels in a favourites list. In the menu Channel list use the CH st buttons to move the cursor to the line Edit favourites list and press the OK button. Two tables will now be displayed: • The Overall list, containing all stored channels. • The Favourites list, into which your selected channels will be copied. Select the channels from the overall list and copy them into the favourites list: Select the channel with CH s t and highlight it with OK. You can now select further channels with CH st and highlight them with OK. Pressing the SWAP button switches to the favourites list. W ...

In the Timer menu, use the CH st buttons to move the cursor to the line Record timer and press the OK button. The following menu will appear: Programming the record timer: 1. Select the line Timer slot (1...10) with CH st 2. Select the timer slot with VOL◀ ▶. 3. Select the line Start time, Stop time or Recording date with CH st and confirm with OK. 4. Use the 0-9 to enter the desired time or date. 5. Confirm the entries by pressing OK. 6. Select the line Channel with CH st and confirm with OK. 7. Select the channel from the channel list with CH st and VOL◀ ▶ and confirm with OK. 8. Select the line Repeat ...

OK button. The reception characteristics of the active channel will now be shown. You can also access the menu in normal TV or radio mode using the yellow button on the remote control. In the upper part of the menu, the active channel and the channel parameters are shown. In the lower part of the menu, the signal characteristics are shown. Level: The further the bar extends to the right, the better the signal being received. C/N: The further the bar extends to the right and the higher the dB level, the better the signal quality. NOTE: The sig ...