Acnodes MKS802 Operation & User’s Manual

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch User Manual MKS802/803/804/1602/1603/1604: 1U rackmount Matrix KVM switch 8/16-port RJ45 with 2/3/4 user console

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference. ¦ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth. ¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit). ¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam age to other equipment or injury to persons nearby. ¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating. ¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. ¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label. ¦ Observe all precautions and warnings attached to the equipment. ¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam aged by transient over-voltage. ¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock. ¦ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invali date its warranty. ¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel. What the warranty does not cover ¦ Any product, on which the serial number has been defaced, modified or removed. ¦ Damage, deterioration or malfunction resulting from: ? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. ? Repair or attempted repair by anyone not authorized by us. ? Any damage of the product due to shipment. ? Removal or installation of the product. ? Causes external to the product, such as electric power fluctuation or failure. ? Use of supplies or parts not meeting our specifications. ? Normal wear and tear. ? Any other causes which does not relate to a product defect. ¦ Removal, installation, and set-up service charges. Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal- lation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ¦ Re-position or relocate the receiving antenna. ¦ Increase the separation between the equipment and receiver. ¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Contents < Part 1 > Matrix DB-15 KVM MKS802 MKS803 MKS804 MKS1602 MKS1603 MKS1604 1.1 Package contents 1.2 KVM port connection 1.3 Remote & Local console connection 1.4 KVM Cascade 1.5 Specifications < Part 2 > Usage 2.1 KVM Button 2.2 Password 2.3 KVM OSD 2.4 KVM Hotkey & Remote Console Hotkey P.1 P.2 - 3 P.4 - 5 P.6 P.7 P.8 P.9 P.10 P.11

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Before Installation ¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately. Installation for standalone KVM Screw A: 2 pcs Screw B: 8 pcs M3.2 x 4.5 mm M4 x 10 mm ¦ Install each bracket using screws A B provided shown in Figure 1. ¦ Fix the KVM into the rack Figure 1.

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Part 1. Matrix DB-15 KVM < 1.1 > Package Contents Matrix D B-15 KVM MK S802 / 1602 KVM unit • MKS802 or MKS1602 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 • Rece iver box for remote console x 1 • Power adapter w/ power cord ( for receiver ) x 1 • 6ft Combo KVM cable for receiver box x 1 MK S803 / 1603 KVM unit • MKS803 or MKS1603 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 • Rece iver box for remote console x 2 • Power adapter w/ power cord ( for receiver ) x 2 • 6ft Combo KVM cable for receiver box x 2 MK S804 / 1604 KVM unit • MKS804 or MKS1604 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 • Rece iver box for remote console x 3 • Power adapter w/ power cord ( for receiver ) x 3 • 6ft Combo KVM cable for receiver box x 3

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Matrix DB-15 KVM Local Console Remote Console 1 MKS802 Power out in Cascade MKS1602 Local Console Remote Console 1 MKS803 Power Rem ote-2 out in Cascade MKS1603 Remote-3 Local Console Remote Console 1 MKS804 Power Remote-2 out in Cascade MKS1604

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch < 1.2 > KVM port connection USB Servers Combo KVM cable support PS/2 or USB server Combo KVM port PS/2 Servers Combo KVM cable support PS/2 or USB server  6 / 10 / 15 ft Combo KVM cable  Support PS/2 or USB server

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch < 1.3 > Local console & remote console connection CAT 5 / 6 c able max. 150m CAT 5 / 6 c able max. 150m Receiver Receiver Remote USB console 3 Remote USB console 1 Rem ote Cat6 Console 3 Local USB con sole Rem ote Cat6 Console 1 R emo te Cat6 Con sole 2 CAT 5 / 6 c able max. 150m Receiver Remote USB console 2

Receiver Front Local Computer Monitor Remote I/O Power Rear USB K/B Mouse Local Remote Button to PC Button to KVM switch The receiver provides a hotkey function for remote console. Monitor Remote Console Local computer ( Optional setup ) CE-6 Combo KVM cable VGA cable Cat6 cable up to 150m 12V DC Power Adapter Front Rear

¦ Cascade up to 8 levels, 240 servers ¦ Cascading multiple KVM with CMC-8 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of MKS802 / 1602 or MKCS1602 / 3202. When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8). The slave matrix KVM will be as a port expansion module of the master matrix KVM, the original remote console on slave KVM will be sacrificed and disabled. Master KVM out in Cascade Slave KVM level 2 To cascade IN port MKS802 Slave KVM level 3 SlaveKVM level 4 Slave KVM level 5 MKS802 MKS802 MKS802 Slave KVM level 6 Slave KVM level 7 Slave KVM level 8 MKS1602 MKS1602 MKS1602 ¦ 8ft Matrix KVM cascade cable

MKS802 MKS803 MKS804 MKS1602 MKS1603 MKS1604 ¯ KVM Port Number of ports: 8 or 16 Connector: Combo connector Connectivity: Combo 4-in-1 KVM cable up to 6, 10 & 15 feet ¯ Local Console Monitor port: 1 x DB-15 VGA (up to 1600 x 1200) Keyboard & mouse port: 2 x USB type connector for keyboard & mouse ¯ Cat6 Remote Console Number of remote port: 1 for MKS802 / 1602 2 for MKS803 / 1603 3 for MKS804 / 1604 Monitor port: DB15-pin VGA, up to 1600 x 1200 Keyboard & mouse port: 2 x USB type connector for keyboard & mouse Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 500 feet ¯ Expansion: Up to 240 servers by 8-level cascade ¯ Compatibility Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac Support: Windows 7 / Vista / 2003 / XP, Linux, Unix ¯ Power Input: AC power adapter Consumption: Max. 48 Watt, Standby 5 Watt ¯ Regulatory Approval: cUL, FCC, CE ¯ Environmental Operating: 0 to 50°C Storage: -5 to 60°C Relative humidity: 90%, non-condensing Shock: 50G peak acceleration (11ms, half-sine wave) Vibration: 58~100Hz / 0.98G (11ms / cycle) ¯ Product Information Dimension (W x D x H): 443 x 171 x 43.6 mm / 17.4 x 6.7 x 1.72 inch Net weight: 3 kg / 6.5 lb ¯ Packing Information Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch Gross weight: 5 kg / 11 lb

Chino, CA 91710 tel:909.597.7588, fax:909.597.1939 © Copyright 2013 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com. MKS802/803/804/1602/1603/1604 1U rackmount Matrix KVM Switch Part 2. Usage 2.1 KVM Button P ower ON ¦ Turn off all servers and KVM switches ¦ Make sure all cables / connectors are properly connected ¦ Recom mend Power ON sequence is monitor, KVM switc h finally computer Front Panel - Port LED Indications 1 6 ports Bank no. PC port LEDs Channel button Bank button 3 2 ports Bank no. 7-Segment BAN K LED indication PC port LED s O nlin e : B lue LED on indicating a PC is connecting to the port Active : G reen LED on indicating a selected channel Rem ote : O rang e LED on indicating the port is selecting by IP / remote console C hannel button Press to select channel from 01 to 32 Bank button Select the bank from 1 to 8

number pad) ¦ Enable password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0” on number pad) 4. In USER level, press Space bar + Enter in user name & password field Remark: Automatic logout after 10 minutes of inactivity ¦ Set your own user name & password 1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password field 2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar 3. Press F1 to the MAIN MENU 4. Select “USER SECURITY” 5. Set password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password b. In the row 1 to 8 (USER), press Enter to set your own user name & password 6. Press Enter to save the setting or press Esc to cancel the editing without any change Remark: a. Blank has underscore, while SPACE doesn’t have b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character ¦ Change your password 1. Login the KVM in SUPERVISOR level by pressing your own user name & password 2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar 3. Press F1 to the MAIN MENU 4. Select “USER SECURITY” 5. Change password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password b. In the row 1 to 8 (USER), press Enter to change your user name & password 6. Press Enter to save the setting or press Esc to cancel the editing without any change Remark: a. Blank has underscore, while SPACE doesn’t have b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character ¦ Disable your password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P 3. You don’t need user name & password to access the KVM OSD menu ¦ Forget your password Please contact your supplier for further support Remark: ¦ You must press the KVM hotkey within 2 seconds ¦ A beep sound will be heard for successful entering KVM hotkey

OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected F1 Access F1 MAIN MENU F2 Logout the OSD menu F3 Previous menu Esc Cancel / Quit Enter Complete / Switch to selected port Switch to previous or next port PgUp/PgDn Switch to previous bank or next bank Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32 1 / 2 / 3 / 4 Remark: Display port 17 ~ 32 for 32 port model only F1 Main Menu 01 LANGUAGE OSD language change 02 PORT NAME EDIT Define port name 03 PORT SEARCH Quick searching by port name 04 USER SECURITY Change password 05 ACCESS LIST Define user access authority 06 HOTKEY Change hotkey 07 TIME SETTINGS Modify scan display time interval 08 OSD MOUSE Modify OSD mouse speed

Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu + Port no. Switch to specific port Turn the buzzer ON and OFF * Default the buzzer is ON Logout the KVM if password security is ON. Show up the status windows Scroll Lock + Scroll Lock + S Activate auto-scan mode for remote & local port *The scan time interval is 5 seconds Scroll Lock + Scroll Lock + A Auto-adjust the video signal 2.4 KVM Hotkey & Remote Console Hotkey Local Console Hotkey Function Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Scroll Lock + Scroll Lock + Bank no. Scroll Lock + Scroll Lock + B Scroll Lock + Scroll Lock + P Advance hotkeys (for Supervisor login only) Scroll Lock + Scroll Lock + S Scroll Lock + Scroll Lock + R Activate auto-scan mode for connected servers *Press any key to exit the auto-scan mode Reset all the KVM settings to factory default *Except User Security settings Scroll Lock + Scroll Lock + U Disable and enable password security *Default security is ON To enable / disable the screen saving Scroll Lock + Scroll Lock + L function and 10 minutes auto-logout *Default the screen saving is OFF Remarks: ¦ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.” - Bank No. : 1 to 8 - Port No. : 01 to 16 - e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4 - e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6 ¦ You must press the hotkey within 2 seconds ¦ A beep sound will be heard for successful entering ¦ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and Enter keys are supports Remote Console Hotkey Function Scroll Lock + Scroll Lock + C Toggle switch between remote & local port Scroll Lock + Scroll Lock + Q Turn the buzzer ON & OFF *Default the buzzer is ON